A light dimmer, also known as a light regulator, is a device that performs not only the function of turning the light on and off but also adjusting its brightness.
Thanks to a touch panel, which is based on advanced sensors, you can change the brightness of the light by simply touching it. Even wet hands won't interfere with the dimmer's operation, as these sensors respond to the slightest touch on the control panel.
The dimmer is equipped with a memory function that allows it to remember the last set brightness level. This means you can turn on the lights with the previously set brightness.
With its capabilities, the dimmer helps create a cozy atmosphere in a room, allowing you to adjust the lighting brightness according to your mood and needs.
The ability to adjust the brightness of the light allows for smoothly turning on and off the lighting fixtures. This is especially convenient during nighttime when it is necessary to gradually adjust the lighting to a comfortable level.
The surface of the dimmer is made of high-strength tempered glass, specifically OptiWite glass. The smooth surface with elegant lines is pleasant to the touch and creates a unique tactile experience.
The touch panel is equipped with innovative sensors. Thanks to these sensors, the switch responds to the slightest touch on the control panel. The sensors are designed to work even if you touch the panel with wet hands.
Currently, these switches meet nearly all the requirements of designers. The color range and shapes of the switches allow for their use in any interior. The use of tempered glass ensures practically flawless quality and durability. Switches with such a design become almost timeless, maintaining their attractive appearance for a long time. This makes them not only functional but also stylish accents in a space.
The stylish LED backlighting around the sensor zone of the switch creates an impressive atmosphere and allows for easy locating even in the dark. The backlighting comes in different colors, with the switch illuminated in blue when turned off and red when turned on.
The combination of a beautiful, user-friendly, and practical design with the ability to control the brightness of the lighting makes sensor switches with dimming function an ideal choice for stylish and functional lighting in your space.
The dimmer can be used in environments with relative humidity of up to 95%, such as bathrooms. In particular, LIVOLO switches have undergone special tests, including the "Salt Spray" test. After 48 hours of testing in a salt spray environment, no signs of corrosion were found on the switch components.
LIVOLO touch switches withstand the test of time and maintain their pristine appearance. The OptiWite tempered glass exhibits high resistance to temperature changes, chemicals, and scratches, ensuring durability and an impeccable surface appearance of the switch over an extended period of time.
Touch switches will always look new and attractive. To clean the switch, simply wipe its surface with a soft damp cloth or towel.
Thanks to the use of fire-resistant materials and tempered glass, LIVOLO touch switches ensure a high level of safety and reliability in your lighting system. The touch switch panel is made of tempered glass, which can withstand temperatures up to 300°C.
The processor controls all aspects of the switch's operation, ensuring convenience, efficiency, and safety. In the event of a circuit interruption, such as a bulb failure or network overload, the touch switch automatically switches to the "off" mode. This provides additional protection against damage and potentially hazardous situations.
Due to the absence of mechanical components, the risk of sparks during operation is eliminated, ensuring safe operation, high reliability, and a long lifespan. This makes them an attractive choice for lighting systems.
LIVOLO touch switches have a standard installation, making them compatible with regular wiring. They can be easily installed in round mounted box used in our country, in accordance with construction standards. Therefore, installing LIVOLO touch switches is easy and convenient.
Dimmable touch switches are compatible with various types of bulbs that support dimming functionality. The recommended power range for bulbs used with such switches is between 5 and 500 Watts.
The upgraded mechanism of LIVOLO touch switches utilizes modern technologies, ensuring a high level of reliability and functionality. The warranty period for LIVOLO touch switches is 12 months, providing peace of mind and confidence in the product's quality. Additionally, these switches have a long lifespan, capable of enduring up to 100,000 presses or more than 20 years of use.
The dimmer has compact dimensions, allowing for easy installation in standard mounting boxes without the need for additional remodeling or electrical system expansions.
- Livolo sensor dimmer;
- screws for fastening;
- instructions;
- a box;
Connection to the electrical grid is done using a standard wiring scheme. You can install the touch switch without the need for any modifications to the existing wiring. The neutral wire is not required. This makes the installation process very simple and efficient.
You can use our light dimmers with LED lamps, provided that the LED lamps support this function. This information can be found in the instruction manual or description of the LED lamps. It is also possible to dim LED strips, but make sure that your transformer supports TRIAC dimming technology.
Touch dimmers are connected to a 220-volt power supply using a regular switch wiring scheme, interrupting the phase. They do not require a neutral wire. The dimmer does not operate on a 12-volt power supply.
Yes, the dimmer operates only in the mode of adjusting the brightness of white light. To select other colors, an RGB dimmer is used, which allows controlling the brightness and color spectrum of LED lamps with the ability to change the lighting color.
To connect the strip to the dimmer, you need to use a compatible TRIAC dimmable power supply. Transformers can have different types, but the main thing to look for is the TRIAC designation and the power it is designed for.
To switch and control the brightness of a lighting device from two locations, a Main (Master) switch is used. It is a two-way dimmer connected to the load device. It operates in both on/off and brightness adjustment modes. Additionally, there is a Secondary (Slave) switch, which is a two-way switch that operates in on/off mode. It sends the on/off command to the Main switch.
All touch switches are equipped with backlighting for the sensor area. However, on Livolo button switches, there may not be any backlighting.
Yes, LIVOLO touch switches can also be installed in a vertical position. Since the mechanism can only be installed in one orientation in the glass panel or frame, the switches or sockets need to be rotated 90 degrees to the right or left for vertical installation. In the case of sockets, only the metal frame needs to be rotated. The socket should be removed from the metal frame, and after rotating the metal frame, it should be reinserted so that the socket holes are positioned horizontally.
The manufacturer claims 100,000 on/off operations, which is a very large number and difficult to verify in practice. However, based on our experience, the switches on the demonstration stand, which are frequently used, continue to function properly for over 5.5 years.
The warranty period for LIVOLO products is 1 year. We provide full and immediate replacement of any defective LIVOLO products.
payments
of $39
No commission. The customer`s billing phone number must match the monobank customer`s financial number
payments
of $58
Commission 0.01% of the value of the goods when debiting a monthly payment
| Switch type | Dimmer |
|---|---|
| Frame material | Tempered glass |
| Length | 223 мм |
| Width | 80 mm |
| Depth | 24 mm |
|
Backlight
The switch sensor have a backlight |
Blue - off, Red - on |
|
Number of posts
Number of mounting boxes for installation. Round mounting boxes are used. |
3 |
|
Number of sensors
Each sensor controls a separate load line. The switch sensor works in the on/off mode. The dimmer sensor works in the on/off + brightness control mode. |
3 |
| Switching type | TRIAC |
| Voltage | 220 V |
| Max. current | 2 А |
| Max. sensor load | 500 Вт |
| Remote control | No |
|
Degree of protection
IP stands for "Ingress Protection", a European standard for protecting devices from external influences. IP20 is suitable for dry environments, such as rooms in a house or apartment, kitchens, hallways, and bedrooms. IP44 is suitable for bathrooms and damp environments. |
IP20 |
|
Installation method
Internal - installation is carried out in mounting boxes |
Internal |
| Fastening wires | Screws |
| Country of manufacture | China |
| Manufacturer | Wenzhou Livolo Electric Co., Ltd. |
| Warranty period, month | 12 |
| Lifetime | 100,000 clicks |
| Type of warranty | Manufacturer |
Pickup from the branch from UAH 70
Delivery to the post office from UAH 50
Courier to the address from UAH 100
Delivery according to the tariffs of Nova Poshta.
* We will ship the order today
Pickup from the branch from UAH 30
Delivery according to Ukrposhta tariffs.
* Shipping the order today or tomorrow
** Subject to 100% online payment by Visa or Mastercard
Pick up the goods yourself from the nearest one LIVOLO store Product reserve 72 hours
* Subject to product availability in the store
** The product is not moved between the warehouse and the store under order!
Delivery in 1 hour from UAH 200
Delivery at Uklon tariffs.
* Dispatch of the order within an hour
** Subject to 100% online payment by Visa or Mastercard
Delivery by courier UAH 250
Delivery from 18:00 to 20:00.
* Subject to cash payment to the courier upon receipt of the goods
Order payment
Online by Visa or Mastercard
Payment by parts PrivatBank
Hire Purchase monobank
Payment by IBAN details
Payment upon receipt
Pay attention. The commission for payment upon receipt at "Nova Poshta" is UAH 20 + 2%.
Product with European quality certificates CE та RoHS.
Warranty is 12 months
Returns within 14 days
Exchange within 30 days
We understand that something may change during the repair process. Do not worry! It is possible to exchange an already purchased product for another one from our catalog within 30 days after purchase.
Accumulative discount
The discount is determined based on the total amount of accumulated purchases, according to the following scale:
* To participate in the accumulative discount system, you must be logged in on the website.
* The obtained discount remains active forever, regardless of when you make your next purchase.
* The discount does not apply to promotional items.
Review discount - 10%
Take a photo and video of the purchased product, post it on your Facebook, Instagram, or TikTok and tag us.
Getting cashback is very simple:
* Funds are credited to your balance and can be used in subsequent orders;
* Posting no later than six months after purchase.
