−29%

2 gang reset switch with dry contact

Switches with dry contacts are used when the Livolo switch should not directly control the light source, but instead send a signal to a module that controls the light source (e.g. Fibaro modules, LOXONE, other Z-Wave devices, etc.).

This type of switch is primarily intended for use with intelligent Smart Home systems that require a so-called "dry contact relay". A dry contact is a contact that does not have a direct connection to the power source and ground. This means that there is no voltage on the dry contact terminals if the terminals are not connected to other equipment.

A touch switch without fixation with a dry contact requires a 220 volt AC power supply. The switch operates in mode #2, where the contact is closed only when touched to the sensor. This type of switch can be used to switch 12V, 24V, or 115V, 230V.

Features

dry contact with reset function;
Power supply 220 volts;
Can be used with any light source from 1W to 1000W;
Sensor is illuminated in blue and red;
Can be installed horizontally or vertically;
Can be installed in both standard and deep mounting boxes;
Simple and quick installation with screw connection;
Up to 5 switches can be installed in one frame;
Mounted to the mounting box with screws;
Durable painted metal holder;
Used with a tempered glass frame;
Capacitive sensor.

Size

The switch dimensions allow it to be installed in mounting boxes of any construction standards accepted in our country. All of this significantly simplifies the installation of switches.

Kit includes

Livolo touch switch;
Screws for mounting;
Instruction manual;
Box.

Wiring diagram Livolo

Touch switch with reset function and dry contact requires a 220 volt AC power supply. The switch closes the contact only when touched to the sensor.

Independent relays of the switch provide a non-potential "dry contact".

Wiring diagram that works from 220 volts

Installation and connection instructions

The switch is installed in a round mounting box

Designed for touch panel mounting

Touch panel is supplied separately

Rate this item

Momentary touch switch LIVOLO, 2 gangs, module without frame, dry contact, 230 V, neutral required, bell/impulse control

In stock

SKU: VL-FC2NB-2G

Leave your feedback

$32

$44

On credit

Features

Device type Interface type 🔘 Touch – controlled by touching the panel without mechanical buttons; looks modern and is easy to clean. 🔳 Rocker – a classic option with physical buttons that are pressed to turn on or off. 🖐️ Touchless – responds to motion or hand proximity without direct contact; ideal for hygienic areas. 💳 Card – operates when a special card is inserted; commonly used in hotels to control power supply.	Touchscreen
Scheme type Scheme type 💡 Standard switch – controls a single light source from one location (on/off). 🔁 Two-way switch – allows control of one light from two different locations (e.g., at the beginning and end of a corridor). 🔀 Intermediate switch – used together with two-way switches to control lighting from three or more points. 🔔 Impulse switch – operates via a relay: a short press sends a pulse that changes the lighting state (convenient for push-button systems).	Reset
Function	Bell
Material Frame material 🔹 Glass frame – elegance and durability. Made of tempered glass, it does not fade over time, does not scratch, and retains its flawless appearance even after years of use. Its smooth surface adds elegance to the interior, reflects light, and creates a sense of depth. 🔹 Plastic frame – a budget-friendly and practical option. It is lightweight and easy to install, but over time, it may lose its color, develop scratches, or show signs of wear. Glass frame test: checking for scratches and strength! Will it withstand the challenge? 🔥🔍	Glass
Load type Load type 🔆 LED – suitable for LED lamps and strips. 💡 Halogen lamps – designed for controlling halogen lighting. 🔥 Incandescent lamps – intended for traditional high energy consumption bulbs. ⚙️ Relay/Controller – used as a control element for relays or automation systems, transmits a signal without direct load. 🌬️ Fans – used to turn exhaust or ceiling fans on and off. 🪟 Blinds/Roller shutters/Curtains – a special switch for controlling lifting, lowering, or positioning of automated systems.	Реле/контролера
Control method Control method ✋ Manual – control by directly pressing the switch. 📱 From smartphone – control via a mobile app over Wi-Fi or the internet. 🎮 Remote control – operation using a remote controller. 🗣️ Voice – switching on and off using voice commands via smart assistants. 📡 From smartphone (ZigBee) – control via a smartphone using the ZigBee protocol.	By hand
Power Power 🔌➕ 220V mains (no neutral) – connects only to the live wire without a neutral; convenient for replacing old switches. 🔋 Battery-powered – operates автономously without connection to the power grid. 🔌 Low voltage (12–24V) – designed for systems with safe low-voltage power supply (automation). 🔌➕➖ 220V mains (with neutral) – connects to both live and neutral wires.	220V network (with neutral)
Power	up to 1000 W
Smart features Smart features 🔘 Standard – operates as a regular switch without additional features or network connectivity. 🤖 Smart – connects to a smart home system, supports remote control, automation, and scenes.	Normal
Compatibility Compatibility 🤖 Google Assistant – supports voice control and automation via the Google Assistant ecosystem. 🏠 Home Assistant – integrates with the Home Assistant smart home system for flexible automation. 🗣️ Amazon Alexa – allows voice control of the switch via Amazon Alexa. 🍎 Apple HomeKit – compatible with Apple HomeKit for control via Apple devices and the “Home” app. 🔗 Matter – a universal smart home standard that ensures compatibility across different brands. 📱 LIVOLO HOME – works with the proprietary LIVOLO HOME app for remote control and configuration.	FIBARO, KNX, LOXONE
Connection type	Wired
Number of gang	2
Number of posts The number of mounting boxes This is the number of individual modules (sockets) for connecting electrical appliances in a single frame. 🔹 1 post – is one switch 🔹 2 posts – is a double switch (double frame). 🔹 3 or more posts – is a switch block with a solid frame. Maximum 5 posts. The number of posts determines how many mounting boxes are used for installing individual modules.	5
Contact type Switching method 🔒 Latching – remains in the selected position (on/off) after being pressed until the next action. 🔄 Momentary (NO) – operates like a button: the contact is closed only while pressed and returns after release. ⚡ Dry contact – does not supply its own voltage, only opens/closes the circuit; used for controlling external devices or systems.	Reset function (NO), Dry contact
Backlight Backlight The backlight in the switches makes it easy to find the switch in the dark and comfortable to use at night. Blue backlight - OFF, Red - ON. Light touch, modern look and premium LIVOLO style.	Blue - off, Red - on
Protection Ingress Protection They define the level of protection for electrical devices against dust and moisture penetration, which is important for their safety and longevity. 🔹IP20 is suitable for use in dry areas, such as rooms in a house or apartment, kitchen, hallway, or bedroom. 🔹IP40 is suitable for areas with low levels of dust but no exposure to moisture. 🔹IP44 is the perfect choice for bathrooms or other areas with high humidity, where accidental water splashes may occur. These protection ratings ensure the reliability and safety of devices in environments where there may be some level of contamination or moisture.	IP20
Width	45 mm
Length	45 mm
Depth	24 mm
Assembling Installation 🧱 Built-in – installed into a mounting box inside the wall; only the decorative panel is visible outside. 📦 Surface-mounted – installed on the wall surface without recessing; easy to install, suitable for exposed wiring. 🌧️ Outdoor – designed for use outdoors or in humid environments; protected against dust and moisture. 🕳️ Flush-mounted – installed level with the wall, providing a clean and minimalistic appearance.	Built-in
Resource	100,000 clicks
Guarantee	5 years
Product manufacturer Manufacturer Wenzhou Livolo Electric Co., Ltd. — a manufacturer of modern high-quality electrical devices for home automation. Founded in 2008 in China, the company has rapidly gained the trust of customers worldwide. Today, LIVOLO is recognized in 100 countries and is confidently expanding across Europe and the USA, offering innovative solutions that redefine comfort and technology. LIVOLO produces: 🖲️ Touch light switches. Smart switches. Wireless switches 🔲 Classic rocker switches in glass frames ⚡ Sockets with grounding, internet, USB, and more 🌡️ Thermostats, thermal heads 🪟 Electric curtain tracks and roller blinds 🚶 Motion sensors, sound sensors, door sensors, temperature and humidity sensors 💡 Stair lighting fixtures 🔋 Power supplies 🔒 Electronic locks	Wenzhou Livolo Electric Co., Ltd.
Country of manufacture	China
Delivery to the city	Kyiv, Kharkiv, Dnipro, Kherson, Zaporizhzhya, Lviv, Odesa, Kryvyi Rih, Mykolaiv, Vinnytsia, Chernihiv, Uzhhorod, Poltava

	Quantity	Out of stock

Total $0 Proceed to checkout