LIVOLO Adapter – Stability and Compatibility for Your Lighting

The LIVOLO adapter is a compact device that improves the compatibility of switches with different light sources and electrical appliances. It ensures stable and uninterrupted lighting operation under any conditions.

When is the adapter useful?

The adapter is recommended in the following cases:

• the lamp flickers when turned off;
• the connected load is less than 5 W;
• a transformer for LED strips or an LED driver in lamps is used;
• a “smart chandelier” controlled by a remote is connected;
• the switch turns on or off by itself;
• the sensor does not respond to touch;
• the switch is connected to a fan.

Advantages

By installing the LIVOLO adapter, you will ensure stable operation of touch switches, regardless of the type of connected lighting or device.

Compact Size

The size of the LIVOLO LED adapter is only 32×17×12 mm – it easily fits even into small installation boxes.

Wiring diagram for LED adapter

The adapter is connected in parallel to the load in a 220-volt network.

Wiring diagram of the LED adapter when using an LED strip.

The adapter is connected in parallel to the transformer in a 220-volt network. This configuration allows both the adapter and the transformer to be powered simultaneously from the 220-volt network.

Wiring diagram for LED Adapter in mounting box

Connection diagram for the Livolo adapter in a scenario where there is a neutral wire in the mounting box where the switch is installed.

Wiring diagram of the LED adapter when using a pulse relay

The adapter is connected in parallel with the relay to the 220 volt network.

Wiring diagram of the LED adapter to the fan with humidity sensor and/or timer

The adapter is connected to zero and to the terminal to which the wire from the switch is connected.