Underfloor heating control without wiring

This wireless solution allows you to control underfloor heating remotely using a thermostat, smart socket, and actuator.

How does it work?
The thermostat measures the room temperature and, according to the set parameters, sends a signal to turn the smart socket on or off.
The actuator, connected to this socket, controls the underfloor heating circuit on the manifold.

What you need for installation:

1. Install the thermostat in the room.
2. Mount the actuator on the corresponding circuit on the manifold.
3. Connect the actuator to the smart socket.
4. Set up automation via the mobile app.

The kit includes:

1. Programmable LIVOLO thermostat
2. Smart LIVOLO socket
3. Thermoelectric actuator

This solution is part of the «LIVOLO Smart Home» system and works through a gateway.

True Comfort: Creating an optimal microclimate with water floor heating and automatic control

How to set up automatic control for water floor heating based on room temperature? To do this, you will need the following equipment:

1. The Livolo Programmable Thermometer measures the temperature and humidity in the room in real-time. The collected data is displayed on the thermometer's screen and in the Livolo Home mobile application.
2. The Livolo Smart socket is installed near the underfloor heating distribution system - the manifold, and is used to control the thermoelectric servo drive. The outlet allows for automatic control of the servo drive based on a configured algorithm or manual control through touch sensors.
3. The thermoelectric servo drive with a valve that opens and closes the water flow. The servo drive is installed on the corresponding water loop of the floor in the room where the thermometer is located.

The automated process works as follows

1. In the Livolo Home APP on your phone, an algorithm for interaction between the thermometer and the smart outlet is created. This algorithm includes a check: if the measured temperature is below the set value, the outlet should be turned on.
2. The Livolo Programmable Thermometer measures the room temperature.
3. If the measured temperature is below the set value, the algorithm triggers: the smart outlet turns on.
4. The activated thermoelectric servo drive opens the valve, allowing the heat transfer fluid to circulate in the underfloor heating system, which leads to an increase in room temperature.

This process ensures the automatic maintenance of the optimal room temperature.

Using the Livolo Home APP on your phone or through voice assistants like Google Home or Amazon Alexa, you can configure various automatic scenarios based on the measured temperature and humidity values in the room.

To utilize all the functions of the thermometer, you will need the Livolo Home application and a gateway.

Temperature Sensor. Digital Thermometer

Monitoring temperature and humidity has a positive impact not only on the quality of life for individuals (especially children or the sick), but also helps prevent mold formation. Utilize the sensor to manage heating systems - convectors, boilers, heaters.

Wi-Fi Thermometer

Temperature control and programming are carried out through the LIVOLO HOME mobile application. An internet connection is required for app-based control. This approach provides unlimited possibilities for management from any point on the planet.

Automatic Climate Control

Monitor temperature and humidity online from any point in your home. You will also be able to configure control of the ZigBee smart socket or switch using temperature and humidity readings through the LIVOLO HOME app.

Glass Frame

The unique smart thermometer and hygrometer are installed within Livolo frames. It will become a true decoration for your room.

Installation

The sensor is installed using a round mounting box (backbox) with a screw fixing center distance of 60 mm. The installation process is very simple and straightforward, causing no issues.