Control the temperature with your phone

Enjoy comfort with the perfect ambient temperature using the LIVOLO thermostat. The smart thermostat allows you to conveniently control the temperature, adjust it via your smartphone or voice assistant. Its stylish and ergonomic design, combined with easy touch control, makes the process of managing comfort as pleasant and effortless as possible.

The feature of the thermostat is the presence of an external temperature sensor. With its help, you will be able to control the floor temperature and adjust heating according to individual requirements. If the external temperature sensor is not used, the thermostat will automatically switch to measuring the temperature of the surrounding air.

Manual and automatic operation modes  

In manual mode, the thermostat can operate in two modes:

1. Temperature control. In this mode, the thermostat maintains the set temperature throughout the entire operation. The temperature can be set within the range of 0°C to 50°C.

2. Cycle control. Use the automatic timer to control the heating. The cycle lasts 30 minutes. For example, if you set it for 15 minutes, the heater will run for 15 minutes, then turn off for 15 minutes, and this will repeat. If you choose 10 minutes, the heater will run for 10 minutes, then turn off for 20 minutes, and this cycle will also repeat.

Additional features:

1. Display brightness adjustment: Ensure optimal visibility of the display at any time of day and under any lighting conditions.

2. Temperature calibration: Set an accurate temperature display to ensure optimal control over the climate in your room.

Automatic mode

The thermostat is controlled through the LIVOLO HOME app on your phone. It supports automatic modes that allow you to set comfortable conditions according to your schedule and needs. For example, the heating can be set to turn on at a specific time each day, maintaining a comfortable temperature when you're at home and turning off at night.

Automation examples

Make sure that the gateway and the smart thermostat are added to the LIVOLO HOME app.

Automation 1: Heating schedule  

For example, you need to set the temperature to remain comfortable when you're at home. To have the heater turn on daily at 5:00 PM and turn off at 7:00 AM:

Open the Schedule section and follow these steps:

1. Turn On  
Timing > Add timing
Repeat > Every Day
Instructions > Status: On;  Temperature: 26℃
Time > 17:00

2. Turn Off  
Schedule > Add schedule  
Repeat > Daily  
Settings > State: Off  
Time > 7:00 AM

Automation 2: Winter Good Night Mode

Because the temperature does not need to be too high after going to bed at night, the temperature can be set to 18°C (the temperature is for reference only). This mode is suitable for families with inconsistent schedules. It is conditional on all lights or some lights being turned off. Perform intelligent temperature adjustment.

Open the Automation section and follow these steps:

Condition 1:
Period > Start 22:00 > End 6:00 > Every day
Condition 2: 
Device > EC smart touch switch1 > Off

Execution:
Device > Smart thermostat > Status: On;  Set temperature: 18℃

Automation 3: Intelligent induction temperature control mode

When the room temperature is lower than 16℃ and the human presence sensor in the room detects someone, the thermostat is turned on and set to 25℃.

Open the Automation section and follow these steps:

Condition 1:
Device > Smart Thermostat > Environmental Temperature > Less than 16℃
Condition 2: 
Device > Motion Sensor > Motion detection > Motion detected

Execution:
Device > Smart thermostat > Status: On;  Set temperature: 25℃

Automation 4: Antifreeze mode

When the room temperature is <0℃, the thermostat turns on and is set to 10℃.

Open the Automation section and follow these steps:

Condition:
Device > Smart Thermostat > Environmental Temperature > Less than 0℃

Execution:
Device > Smart thermostat > Status: On;  Set temperature: 10℃

The thermostat not only provides convenience in control but also efficiency in operation. Thanks to the functional touch screen, you can easily configure two operating modes:

1. Constant temperature support: In this mode, the thermostat maintains a constant temperature throughout the entire operating period. This is an ideal solution for ensuring comfort and stability in your space, allowing you to enjoy optimal climate without interruptions.
2. Timer setting: With this function, you can program the thermostat to turn on at a specific time. This is useful in situations where you need to automatically activate heating or cooling in a room for a certain period to save energy or provide optimal conditions for your arrival.

Heating Schedule

Program the heating system to turn on and off according to your schedule and needs. Simply set the activation and deactivation times, as well as the desired temperature, and the thermostat will automatically follow these settings. This feature ensures comfort in your home or office while efficiently using energy on a schedule.

Advantages

1. Touch Display: The touch display provides useful information about the current temperature and operating mode, simplifying the temperature adjustment process and ensuring comfortable usage.
2. Tempered Glass: The thermostat is made from tempered glass, giving it a stylish appearance while also making it durable and resistant to mechanical damage.
3. Built-in Temperature Sensor: The temperature sensor is integrated within the mechanism, allowing precise measurement of the surrounding air temperature.
4. Wide Temperature Range: Ranging from 0 to 50 ℃, it's suitable for various climate conditions, ensuring comfort throughout the year.
5. Combination with Switch or Socket: The option to install the thermostat alongside a switch or socket in a single frame not only saves space but also adds cleanliness and coherence to your interior.
6. Energy Savings: Automatic heating shutdown upon reaching the desired temperature helps reduce electricity expenses.
7. Japanese Relay: The high-quality Japanese relay ensures reliable switching of the heating, maintaining a stable room temperature.
8. Normally Open Contact: This function allows the thermostat to provide power to the heating only when the current temperature is below the set value – in other words, when there's a need to raise the temperature.
9. Easy Installation: Mounting into a standard round junction box simplifies the thermostat installation process, making it accessible to a wide range of users.
10. External temperature sensor: The 3-meter length of the sensor provides flexibility and the possibility of optimal sensor placement for maximum precision temperature control.

Compatibility with Various Heating Systems

The thermostat is designed to efficiently control various heating systems, such as underfloor heating, infrared panels, electric convectors, heaters, and gear motorized valves.

Control from Your Phone

The advanced capabilities of the smart programmable thermostat are facilitated by the brain of the LIVOLO system - the gateway. Add the thermostat to your Smart Home using the LIVOLO HOME app. The gateway operates on the EC operating system. After adding the thermostat to the app, you'll gain additional features, such as:

1. Heating schedule setup: Conveniently program the heating system's activation and deactivation times from your phone to ensure optimal comfort at home or in the office.
2. Display brightness adjustment: Ensure optimal display visibility at any time of day and in any lighting conditions.
3. Temperature calibration: Set precise temperature display to ensure optimal climate control in your space.

External temperature sensor

The three-meter length of the sensor provides flexibility and the ability to optimally position the sensor for maximum temperature control accuracy. This ensures the efficiency of the thermostat, allowing you to enjoy comfort in any conditions.

Advantages of the external temperature sensor

• Length of the cable is 3 meters.
• Accuracy is less than 1 degree.
• Temperature measurement range is from -55 °C to +125 °C.
• IP68 protection class.
• Sensor power supply is from 3.3V to 5V.
• Measurement time does not exceed 750 ms.
• Only 3 wires are required to connect to a microcontroller.

Designation of the wires of the digital temperature sensor:

VDD – red (plus)
DQ - yellow or white (data)
GND – black (minus)

New design with an enlarged display

The thermostat boasts not only a beautiful design but also a clearly visible large display. This will allow you to easily and effectively control and maintain a comfortable temperature in the room.

White, black, silver, and golden

The thermostat will perfectly fit into any interior style. Whether you're aiming for classic elegance, modern minimalism, or exquisite luxury, LIVOLO offers options that will complement your space and provide a harmonious appearance.

Uncompromising Quality and Attention to Every Detail

The thermostat is crafted from high-quality materials. The touch screen and frame are made of tempered glass, while the contact group is manufactured from copper. The thermostat is resistant to UV radiation, and even under direct sunlight, its color remains vibrant and fresh for many years. It will serve for an extended period, maintaining its original appearance and consistent surface quality.

Scratch-Protected Glass Surface

The touch screen and frame of the thermostat are made from tempered glass. This not only imparts a modern and elegant appearance but also ensures the long-term preservation of the device's attractive external look.

Operating Principle

Temperature maintenance mode. In the calm mode, the thermostat's display shows the current room air temperature. To set the desired temperature, simply touch the "+" or "-" touch buttons. For instance, if you select a temperature of 20°C, the thermostat will keep the heating on until the actual room temperature reaches 20°C. If the temperature drops to 18.9°C, the thermostat will automatically turn on again.

Timer Mode. The thermostat features a timer function that allows you to set a time after which it will automatically turn off.

Compatibility with Various Heating Systems

The thermostat is designed for efficient control of various heating systems, including water-based underfloor heating, infrared panels, electric convector heaters, radiators, and grid servos.

Thermostat Installation

It is installed into a round mounting box with a center-to-center distance for mounting screws of 60 mm. The size of the Livolo thermostat is 80*80 mm.

Modular System

The package includes:

• Pre-programmed Livolo thermostat;
• External temperature sensor with a length of 3 meters;
• Glass frame with support;
• Screws;
• Box.

Connection

An extremely simple connection scheme allows you to install the thermostat without any extra effort or specialized knowledge.

When connecting the thermostat to the servo drive, you need to use a servo drive with a normally open contact.