LIVOLO Two-Channel Smart Relay for Lighting Control
Already settled into bed but forgot to turn off the light? Left the hallway light on and remembered just as you were leaving home? The LIVOLO smart relay lets you control two lighting circuits from your smartphone, set automatic switch-off, and keep using your familiar wall switch. One compact relay adds convenience you will appreciate every day.
The relay fits inside the wall box behind a mechanical switch, turning it into a smart switch. There is no need to change your switch design or your family’s habits: the switches work as before, while you gain additional control options through the LIVOLO HOME app.
Two Channels for Independent Control of Two Lighting Circuits
Each channel controls its own lighting circuit. For example, you can connect the main lighting to one channel and decorative lighting to the other. Turn on both when you need bright illumination, or leave only the accent lighting on for a relaxing evening.
Control the lights through the app without getting up from the sofa or bed. The wall switch remains convenient for family members and guests — there is no need to reach for a phone every time.
A compatible LIVOLO EC gateway is required for smartphone control and automation setup.
Keep the Switches That Suit Your Interior
The relay is hidden inside the wall box, keeping your room’s appearance unchanged. It measures just 39.5 × 39.5 × 16 mm. Before installation, check that there is enough space behind the switch mechanism for the relay and wiring.
The device supports standard rocker switches and momentary push-button switches. It also supports wiring with two-way switches — a convenient solution for bedrooms, hallways, or staircases where lighting is controlled from two locations.
The Lights Turn Off Automatically
For spaces where lighting is needed only briefly, the relay offers an automatic switch-off delay mode. In the app, you can choose 15, 45, or 90 seconds, or set a custom delay.
- In the hallway: press the switch and walk through comfortably — the light turns off when the countdown ends.
- In a pantry or walk-in wardrobe: take what you need and leave — the light will not stay on for long.
- On the stairs: set a delay that gives you enough time to walk through the illuminated area comfortably.
In this mode, pressing the switch again restarts the countdown, giving you extra time. Fewer unnecessary actions and less electricity spent lighting an empty room.
Lighting That Follows Your Rules
Through LIVOLO HOME, you can include the relay in smart home scenes and automations. For example, schedule the lights to turn off at a specific time or add them to a “Leaving Home” scene.
With compatible sensors and the appropriate settings, lighting can respond to other events — for example, turning on when a door opens. Let the system handle repetitive tasks and enjoy light when you need it.
Choose What Happens When Power Returns
In the app, you can set how the lighting behaves after a power outage:
- Restore the previous state — the lighting returns to the state it was in before the outage.
- Off — the lights remain off when power returns.
- On — the lights turn on when power is restored.
For example, select “Off” for the bedroom so the lights do not wake you in the middle of the night when power returns.
Remote Control Option
The relay supports direct pairing with a compatible LIVOLO remote control. This is convenient when you want to turn the lights on or off from the sofa or bed without a smartphone.
Direct remote control and gateway connection are alternative operating modes. Once the relay is paired with a gateway, its direct remote pairings are deleted. You can pair a remote again after unpairing the relay from the gateway.
How to Get Started
- Install the relay inside the wall box and connect it according to the wiring diagram for your switch type. Installation must only be carried out with the power disconnected.
- For smartphone control, install the LIVOLO HOME app and add a compatible EC gateway.
- In the app, tap “+” and select the two-channel Smart Switch Control Module.
- Press and hold the relay button for approximately 5 seconds until you hear a beep and the indicator starts flashing. Follow the app instructions to complete pairing.
- Give the lighting circuits clear names, such as “Main Light” and “Accent Lighting”, and configure the functions you need.
The relay supports installation without a neutral wire. If a lamp flickers or glows faintly when switched off, the manual recommends connecting the neutral wire N.
Technical Specifications
| Parameter |
Value |
| Brand |
LIVOLO |
| Device type |
Smart lighting control relay |
| Number of channels |
2 independent channels |
| Power supply |
100–240 V AC, 50/60 Hz |
| Maximum load |
Up to 5 A per channel, no more than 10 A in total |
| Minimum load |
5 W |
| Communication protocol |
EC — LIVOLO’s proprietary protocol |
| App |
LIVOLO HOME |
| Gateway for app control |
A compatible LIVOLO EC gateway is required |
| Neutral connection |
Optional; recommended if lamps flicker or glow faintly when switched off |
| Dimensions |
39.5 × 39.5 × 16 mm |
| Indicators |
LED and audible signal |
| Operating temperature |
−10 to +40 °C |
| Rated lifespan |
100,000 cycles |
| Housing |
Flame-retardant material |
Two lighting circuits, your familiar switch, and greater comfort every day. The LIVOLO two-channel smart relay lets you control lighting from a convenient location, automate its operation, and avoid unnecessary trips back to the switch.
Pickup from the branch from UAH 70
Delivery to the post office from UAH 50
Courier to the address from UAH 100
Pickup from the branch from UAH 30
Online by Visa or Mastercard
Payment by parts PrivatBank
Hire Purchase monobank
Payment by IBAN details
Payment upon receipt
Warranty - 5 years
Returns within 14 days
Exchange within 30 days
Accumulative discount