Video

Add lighting control beside your bed, sofa or room entrance without running wires to the switch. The battery-powered LIVOLO VL-XR008 sends commands to a compatible relay or smart wall switch. Add it to an existing system or build a new combination of devices. A relay and smart wall switch are not included.

How it works

The wireless switch is a transmitter: touching a button sends a radio command to the paired device. The relay or smart switch connected to the lighting wiring switches the lights on and off. The wireless switch does not connect directly to the light fitting or switch its power supply.

Choose your control arrangement

One switch — one relay. Control a ceiling light, wall light or another lighting circuit from your chosen location.
One switch — several relays simultaneously. Pair the required touch button with several compatible relays to control lights in different locations with one touch.
Several switches — one relay. Add control of the same lighting circuit at the entrance and on both sides of the bed without cables between the switches.
Wireless switch — smart wall switch. Pair it with an M7FC1Z2 to control the lighting from both the wall panel and an additional wireless location.

Compatible devices

VL-XE001 / VL-XE002 — compatible relays without on-relay manual touch control of the load.
FC1Z2-2G / FC2Z2-2G — compatible relays with additional manual control through the relay’s own touch sensor.
M7FC1Z2 — a compatible smart touch wall switch for installation in a wall back box.

Touch control options

Two touch buttons allow two separate control groups. Each button can be paired with the required channel of a compatible receiver or with a group of receivers: for example, the first for main lighting and the second for wall lights and accent lighting.

Colour and finish

Colour: white. Glass front surface: glossy 2.5D glass with rounded edges. The glossy finish gives the surface a distinctive shine.

Specifications

Touch buttons: 2.
Power supply: CR2032 battery.
Radio range: up to 30 m; walls and obstacles may reduce the range.
Front panel size: 80 × 80 mm.
Mounting: double-sided tape, without a wall back box.
Protection rating: IP20.
Warranty: 60 months.

Pairing and installation

You can pair the switch with your chosen compatible relay or smart switch yourself. Activate pairing mode on the receiver according to its manual, then touch the required button on the wireless switch. For group control, repeat pairing with the same button on the other receivers. To add another control location, pair another wireless switch with the same receiver. The number of stored pairings and programming procedure depend on the receiver model. Test communication at the chosen location before mounting; metal surfaces may weaken the radio signal.

Smart features

A gateway is not required for direct control of paired devices. Smartphone control of compatible devices, schedules and scenes in LIVOLO HOME require a suitable LIVOLO gateway and a configured system. The gateway is sold separately. Automation features depend on the connected equipment.

Package contents

LIVOLO VL-XR008 wireless touch switch, glass front panel and manual. The relay, smart wall switch and gateway are sold separately.

Чи є аналогічні вимикачі для шлюзу zigbee

Андрій, Технологію Zigbee розробили на початку 2000-х років, але з того часу з'явилися новіші технології з ширшими можливостями.

A new review or comment

Rate this item

LIVOLO VL-XR008 wireless touch switch, 2 gangs, relay not included, gold, glossy glass

In stock

SKU: VL-XR008-A

1 Review

Choose color

LIVOLO VL-XR008 wireless touch switch, 2 gangs, relay not included

Surface / frame

Glossy Frosted Glossy 2.5D

$26

On credit

LIVOLO VL-XR008 wireless touch switch with 2 touch buttons; relay not included. Powered by a CR2032 battery. One wireless switch can control one relay or several relays at the same time. To control the lighting from different locations, you can pair several wireless switches with the same relay. Also controls a compatible smart wall switch. Gold finish, glossy glass. Receiver sold separately.

Features

Device type Interface type 🔘 Touch – controlled by touching the panel without mechanical buttons; looks modern and is easy to clean. 🔳 Rocker – a classic option with physical buttons that are pressed to turn on or off. 🖐️ Touchless – responds to motion or hand proximity without direct contact; ideal for hygienic areas. 💳 Card – operates when a special card is inserted; commonly used in hotels to control power supply.	Бездротовий
Scheme type Scheme type 💡 Standard switch – controls a single light source from one location (on/off). 🔁 Two-way switch – allows control of one light from two different locations (e.g., at the beginning and end of a corridor). 🔀 Intermediate switch – used together with two-way switches to control lighting from three or more points. 🔔 Impulse switch – operates via a relay: a short press sends a pulse that changes the lighting state (convenient for push-button systems).	Normal switch, 2 way
Function	Switch
Material Frame material 🔹 Glass frame – elegance and durability. Made of tempered glass, it does not fade over time, does not scratch, and retains its flawless appearance even after years of use. Its smooth surface adds elegance to the interior, reflects light, and creates a sense of depth. 🔹 Plastic frame – a budget-friendly and practical option. It is lightweight and easy to install, but over time, it may lose its color, develop scratches, or show signs of wear. Glass frame test: checking for scratches and strength! Will it withstand the challenge? 🔥🔍	Glass
Load type Load type 🔆 LED – suitable for LED lamps and strips. 💡 Halogen lamps – designed for controlling halogen lighting. 🔥 Incandescent lamps – intended for traditional high energy consumption bulbs. ⚙️ Relay/Controller – used as a control element for relays or automation systems, transmits a signal without direct load. 🌬️ Fans – used to turn exhaust or ceiling fans on and off. 🪟 Blinds/Roller shutters/Curtains – a special switch for controlling lifting, lowering, or positioning of automated systems.	Галогенні, LED, Incandescent lamps
Control method Control method ✋ Manual – control by directly pressing the switch. 📱 From smartphone – control via a mobile app over Wi-Fi or the internet. 🎮 Remote control – operation using a remote controller. 🗣️ Voice – switching on and off using voice commands via smart assistants. 📡 From smartphone (ZigBee) – control via a smartphone using the ZigBee protocol.	By hand, By phone, Remote control, By voice
Power Power 🔌➕ 220V mains (no neutral) – connects only to the live wire without a neutral; convenient for replacing old switches. 🔋 Battery-powered – operates автономously without connection to the power grid. 🔌 Low voltage (12–24V) – designed for systems with safe low-voltage power supply (automation). 🔌➕➖ 220V mains (with neutral) – connects to both live and neutral wires.	Battery CR2032
Power	up to 1000 W
Smart features Smart features 🔘 Standard – operates as a regular switch without additional features or network connectivity. 🤖 Smart – connects to a smart home system, supports remote control, automation, and scenes.	Smart
Compatibility Compatibility 🤖 Google Assistant – supports voice control and automation via the Google Assistant ecosystem. 🏠 Home Assistant – integrates with the Home Assistant smart home system for flexible automation. 🗣️ Amazon Alexa – allows voice control of the switch via Amazon Alexa. 🍎 Apple HomeKit – compatible with Apple HomeKit for control via Apple devices and the “Home” app. 🔗 Matter – a universal smart home standard that ensures compatibility across different brands. 📱 LIVOLO HOME – works with the proprietary LIVOLO HOME app for remote control and configuration.	Google Assistant, Homey, Amazon Alexa, Apple HomeKit, Matter, LIVOLO HOME
Connection type	Wireless
Number of gang	2
Number of posts The number of mounting boxes This is the number of individual modules (sockets) for connecting electrical appliances in a single frame. 🔹 1 post – is one switch 🔹 2 posts – is a double switch (double frame). 🔹 3 or more posts – is a switch block with a solid frame. Maximum 5 posts. The number of posts determines how many mounting boxes are used for installing individual modules.	5
Contact type Switching method 🔒 Latching – remains in the selected position (on/off) after being pressed until the next action. 🔄 Momentary (NO) – operates like a button: the contact is closed only while pressed and returns after release. ⚡ Dry contact – does not supply its own voltage, only opens/closes the circuit; used for controlling external devices or systems.	With fixation
Backlight Backlight The backlight in the switches makes it easy to find the switch in the dark and comfortable to use at night. Blue backlight - OFF, Red - ON. Light touch, modern look and premium LIVOLO style.	Blue - off, Red - on
Protection Ingress Protection They define the level of protection for electrical devices against dust and moisture penetration, which is important for their safety and longevity. 🔹IP20 is suitable for use in dry areas, such as rooms in a house or apartment, kitchen, hallway, or bedroom. 🔹IP40 is suitable for areas with low levels of dust but no exposure to moisture. 🔹IP44 is the perfect choice for bathrooms or other areas with high humidity, where accidental water splashes may occur. These protection ratings ensure the reliability and safety of devices in environments where there may be some level of contamination or moisture.	IP20
Width	80 mm
Length	80 mm
Depth	8 mm
Assembling Installation 🧱 Built-in – installed into a mounting box inside the wall; only the decorative panel is visible outside. 📦 Surface-mounted – installed on the wall surface without recessing; easy to install, suitable for exposed wiring. 🌧️ Outdoor – designed for use outdoors or in humid environments; protected against dust and moisture. 🕳️ Flush-mounted – installed level with the wall, providing a clean and minimalistic appearance.	Overhead
Resource	100,000 clicks
Guarantee	5 years
Product manufacturer Manufacturer Wenzhou Livolo Electric Co., Ltd. — a manufacturer of modern high-quality electrical devices for home automation. Founded in 2008 in China, the company has rapidly gained the trust of customers worldwide. Today, LIVOLO is recognized in 100 countries and is confidently expanding across Europe and the USA, offering innovative solutions that redefine comfort and technology. LIVOLO produces: 🖲️ Touch light switches. Smart switches. Wireless switches 🔲 Classic rocker switches in glass frames ⚡ Sockets with grounding, internet, USB, and more 🌡️ Thermostats, thermal heads 🪟 Electric curtain tracks and roller blinds 🚶 Motion sensors, sound sensors, door sensors, temperature and humidity sensors 💡 Stair lighting fixtures 🔋 Power supplies 🔒 Electronic locks	Wenzhou Livolo Electric Co., Ltd.
Country of manufacture	China
Delivery to the city	Kyiv, Kharkiv, Dnipro, Kherson, Zaporizhzhya, Lviv, Odesa, Kryvyi Rih, Mykolaiv, Vinnytsia, Chernihiv, Uzhhorod, Poltava

Video

	Quantity	Out of stock

Total $0 Proceed to checkout