|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Touch switch for roller shutters, curtains, gates
Used for motor control. Operates in open/close mode. Control is done by touching the sensor.
The switch has two sensors. The first one is responsible for opening (up), the second for closing (down). There is protection against simultaneous pressing of both sensors. Automatic shutdown when the engine stops or after a 55-second timer.
The switch has a backlight that shows the current state of the switch, blue - off, and red - on.
The switch is installed in a round mounting box.
Features
- Protection against simultaneous pressing of both sensors
- Automatic shut-off when the engine is stopped
- Automatic shut-off after 55 seconds by timer
- Can be used with any light source from 1W to 1000W
- Sensor is illuminated with blue and red colors, making it easy to find the switch at night
- Can be installed horizontally or vertically
- Can be installed in standard or deep mounting boxes
- Simple and fast installation with screw connection
- Up to 5 switches can be installed in one frame
- Attached to the mounting box with screws
- Sturdy painted metal support
- Used with a frame made of tempered glass
- Capacitive sensor
Size
The switch dimensions allow it to be installed in mounting boxes of any construction standards accepted in our country. All of this significantly simplifies the installation of switches.
Kit includes
- Livolo touch switch;
- Screws for mounting;
- Instruction manual;
- Box.
Wiring diagram
When controlling the motor by phase

When controlling the motor by PIN

Installation and connection instructions
The switch is installed in a round mounting box

Designed for touch panel mounting
Touch panel and Mounting frame is supplied separately



