Before the purchase, there are many questions that need clear and answers so that later problems do not arise with the installation or, in extreme cases, with the use of the purchased product.
We have collected the most common questions asked by customers, electricians or designers during planning, before or after the purchase.
1. Are the switches installed in a standard 60 mm mounting box?
Of course! You can easily install Livolo products in a standard assembly box 60 mm.
2. What should be the interaxial distance of sockets for installing switches?
Standard distance for installation multi-post circuit breakers is 71 mm, so using this distance is the main requirement.
3. Is it possible to install touch panels and frames vertically?
Yes! Panels and frames Livolo can also be installed vertically. For vertical installation, you need to turn them 90 degrees to the right or left.
In the case of sockets, remove the mechanism from the caliper, rotate it so that the holes for the forks are horizontal and place it back in the caliper.
4. Are there through switches in the Livolo family?
You can find among Livolo products through switches for switching light from two or more places.
5. Compatibility of switches with different types of lamps?
The Livolo electronic switch system is designed and adapted to all types of lamps, they can be ordinary incandescent, halogen, LED, and these switches can be used to operate any technique and equipment, which greatly expands the possibilities of use.
6. Is a neutral wire required for switches?
99% of Livolo touch switches do not require a neutral wire, but there are switches that do require it to work. For example, blind switch.
