A touch pass-through switch is installed when it is necessary to turn on the light in one place and turn it off in another. Typically, these are long corridors and pass-through rooms. The pass-through switch is connected using a special wiring scheme in combination with another pass-through switch. The proper operation of LIVOLO pass-through switches requires the use of two to five switches in one circuit.
No modifications to the electrical wiring are required to install LIVOLO pass-through switches. LIVOLO touch pass-through (toggle, alternate) switches can be installed on existing wiring that was laid for mechanical pass-through switches.
Livolo makes your home smarter
Livolo ZigBee Switch is a smart device that combines reliability and ease of use. Its touch panel is sensitive to the slightest touch and allows for instant control of lighting. Simply touch the surface of the switch to turn the lights on or off. With the pleasant LED backlighting, the switch is convenient to use even in the dark.
Any type of chandeliers, lamps, or electrical appliances can now be turned on/off from anywhere with internet access using a phone or tablet. You don't need to be physically near the switch to turn it on or off.
The touch switch can not only turn the lights on and off but also adjust their brightness*. Additionally, it has additional features that enhance the security of your home. The switch can simulate the presence of homeowners, helping to prevent potential crimes and providing peace of mind. It can also control curtains* or blinds through automation scenarios, adding convenience and comfort to your everyday life.
The Livolo ZigBee smart switch is a lighting switch that supports remote control via the ZigBee protocol. Simply connect the switch to a gateway through the LIVOLO HOME mobile application, and you'll be amazed by its capabilities.
Livolo helps you enjoy life
Remotely control your lighting, turning it on and off from anywhere, at any time.
Set up automatic lighting control based on time.
Adjust the lighting to suit your mood.
Adding Livolo LightSwitches to your system is just a few clicks away with the LIVOLO HOME app.
Stylish, convenient, modern.
Easy to install in place of a regular switch on a standard spot.
Control your lighting right from your smartphone screen from anywhere in the world or simply lying on the couch.
Control the switch with voice commands through Amazon Alexa or Google Home.
Create your own smart lighting system in just 1 minute.
Set up lighting scenarios for each added device.
Automate lighting control based on predefined schedules.
Monitor the status of the switch in real-time - whether it's on or off.
You can set up a schedule for the switch, configure timers, or even set it to automatically turn on or off based on conditions such as the daily schedule or occupancy in the room.
Convenient brightness control of the light from anywhere using a smartphone or tablet. Smooth brightness adjustment helps create a comfortable atmosphere according to users' needs.
The ability for quick light control, enabling you to turn on, turn off, or adjust the lighting without the need for physical contact with switches or other devices. You simply need to speak a voice command.
The switches have no moving parts that can fail or require regular maintenance. This ensures their high reliability and long service life.
The soft blue backlighting of the touch area serves as ambient light, making it easy for you to locate the switch at night.
Helps avoid the risk of electric shock. The glass panel provides electrical insulation and prevents moisture from penetrating into the electrical components. This is especially beneficial in bathrooms, kitchens, and other areas with high humidity.
The glass is durable and resistant to scratches, fingerprints, and wear. It can maintain its original brightness and appearance for a long time. It is easy to clean and remove stains and dirt. It looks stylish and modern, adding elegance to any interior. It can be used in various design styles and harmoniously complements different materials.
Thanks to its compatibility with any type of lamps, the touch switch can be used with various lighting options, including LED bulbs, LED strips, compact fluorescent lamps, and others. This allows for its use in different spaces without limitations.
Touch switches are installed as a mechanical switch in the phase break. No neutral wire connection is required. A round mounting box is used for the installation of the switch.
The capabilities of the LightSwitch are consistently supported by the main device of the LIVOLO system - the hub. Adding a switch to the hub is as simple as a single click in the LIVOLO HOME app.
Installing an additional hub is an easy way to expand the boundaries of your system. It becomes necessary when LIVOLO devices are located on different floors, in adjacent buildings, or at a significant distance. With an additional hub, the system maintains a stable connection with all devices, ensuring comprehensive and uninterrupted protection. The hub operates under the control of a real-time ZigBee operating system.
Compatible with new wireless network technologies and standards.
No neutral wire is required for its installation. The LightSwitch has a shallow depth of 32mm. This smart switch can be easily installed in place of an old switch without the need to replace the mounting box or wiring.
Connect the live wire to the "L" terminal on both switches. Then, connect the two switches with an information wire at the "COM" terminal. Finally, connect the lamp wire to the "L1" terminal on the Master switch.
After connecting the wires and restoring power to the circuit, it is necessary to program the switches. Programming should begin with the Master switch. More details about programming.
Master switch - this is 2 way switch, works in on/off mode.
Slave switch - this is 2 way switches which sends the on/off command to the main switch.
Connect the live wire to the "L" terminal on all three switches. Then, connect all three switches with an information wire at the "COM" terminal. Finally, connect the lamp wire to one of the switches at the "L1" terminal.
After connecting the wires and restoring power to the circuit, it is necessary to program the switches. Programming should begin with the Main switch. More details about programming.
Yes. Standard 2 way touch switch (alternate, pass-through, crossover) switches have the function of three-way switching. It is possible to control the lamp from 3-5 different locations. Therefore, there is no separate model for a three-way switch because there is no need for it.
Livolo touch 2 way switches work in pairs with each other. They are not designed to work with mechanical switches. After connecting the touch switches, you need to program them to work together.
Yes, Livolo 2 way touch switches allow you to control the lighting from different locations. The connection scheme for 2 way touch switcheі is similar to machanical switches, with the only difference being that the lighting control is done through the COM wire, to which you can connect 2 way touch switches in any quantity.
Yes, the Livolo switch is versatile and can function as a regular switch. Moreover, in a 2 gang 2 way touch switch, one sensor can be used as a regular switch while the other can be used as a 2 way switch. This provides greater flexibility in lighting control and allows you to use the switch according to your needs.
2 way switches have a Master switch and Slave switches. The Master switch controls the load, while the Slave switches send the on/off command to the Master switch. Smart switches are installed only in the position of the Master switch. Slave switches use usual 2 way switches.
All touch switches are equipped with backlighting for the sensor area. Turn on the switch – red indicators, turn off the switch – blue indicator. However, Livolo mechanical switches do not have backlighting.
Yes! Livolo switches can also be installed vertically. Since the module can only be installed in a glass panel or frame in one way, the switches or sockets need to be rotated 90 degrees to the right or left for vertical mounting. In the case of sockets, only the metal frame needs to be rotated. The socket should be taken out of the metal frame, and after rotating the metal frame, the socket should be inserted back into it so that the socket holes are oriented horizontally.
The manufacturer claims 100,000 on/off operations, and it is difficult to verify this in practice due to the large number. However, based on our experience, the switches on the demonstration stand, which are frequently used, continue to function normally for over 5.5 years. This demonstrates the durability and reliability of these switches.
The warranty period for Livolo products is 1 year. We provide full and immediate replacement of any defective Livolo products.
Yes, our switches can work with energy-saving lamps and LED lamps as long as the wattage is more than 1W.
Filament lamp and dimmable LED lamp; All bulbs works with mechanical dimmer, works with ours, Only the wattage should be 5-500W.
It depends, if the system only needs a signal on/off, it can be. Otherwise, our switch is not suitable for home automation system because the codes are different.
Yes, our 2 way switch also can be an intermediate switch, you can connect three 2 way switches together.
For on/off touch switch-relay, dimmer switch – triac.
payments
of $11
No commission. The customer`s billing phone number must match the monobank customer`s financial number
payments
of $17
Commission 0.01% of the value of the goods when debiting a monthly payment
| Switch type | 2 way, 3 way |
|---|---|
| Width | 80 mm |
| Length | 80 mm |
| Depth | 24 mm |
|
Number of posts
Number of mounting boxes for installation. Round mounting boxes are used. |
1 |
|
Number of sensors
Each sensor controls a separate load line. The switch sensor works in the on/off mode. The dimmer sensor works in the on/off + brightness control mode. |
1 |
|
Backlight
The switch sensor have a backlight |
Blue - off, Red - on |
| Frame material | Tempered glass |
| Voltage | 220 V |
| Max. sensor load | 1000 W |
| Max. current | 5 А |
| Lifetime | 100,000 clicks |
|
Degree of protection
IP stands for "Ingress Protection", a European standard for protecting devices from external influences. IP20 is suitable for dry environments, such as rooms in a house or apartment, kitchens, hallways, and bedrooms. IP44 is suitable for bathrooms and damp environments. |
IP20 |
|
Installation method
Internal - installation is carried out in mounting boxes |
Internal |
| Fastening wires | Screws |
| Switching type | Relay |
| Technology | ZigBee |
| Voice control | Google Home or Amazon Alexa |
| Remote control | Livolo Home App |
| Manufacturer | Wenzhou Livolo Electric Co., Ltd. |
| Country of manufacture | China |
| Warranty period, month | 12 |
| Type of warranty | Manufacturer |
| Brand | LIVOLO |
Pickup from the branch from UAH 70
Delivery to the post office from UAH 50
Courier to the address from UAH 100
Delivery according to the tariffs of Nova Poshta.
* We will ship the order today
Pickup from the branch from UAH 30
Delivery according to Ukrposhta tariffs.
* Shipping the order today or tomorrow
** Subject to 100% online payment by Visa or Mastercard
Pick up the goods yourself from the nearest one LIVOLO store Product reserve 72 hours
* Subject to product availability in the store
** The product is not moved between the warehouse and the store under order!
Delivery in 1 hour from UAH 200
Delivery at Uklon tariffs.
* Dispatch of the order within an hour
** Subject to 100% online payment by Visa or Mastercard
Delivery by courier UAH 250
Delivery from 18:00 to 20:00.
* Subject to cash payment to the courier upon receipt of the goods
Order payment
Online by Visa or Mastercard
Payment by parts PrivatBank
Hire Purchase monobank
Payment by IBAN details
Payment upon receipt
Pay attention. The commission for payment upon receipt at "Nova Poshta" is UAH 20 + 2%.
Product with European quality certificates CE та RoHS.
Warranty is 12 months
Returns within 14 days
Exchange within 30 days
We understand that something may change during the repair process. Do not worry! It is possible to exchange an already purchased product for another one from our catalog within 30 days after purchase.
Accumulative discount
The discount is determined based on the total amount of accumulated purchases, according to the following scale:
* To participate in the accumulative discount system, you must be logged in on the website.
* The obtained discount remains active forever, regardless of when you make your next purchase.
* The discount does not apply to promotional items.
Review discount - 10%
Take a photo and video of the purchased product, post it on your Facebook, Instagram, or TikTok and tag us.
Getting cashback is very simple:
* Funds are credited to your balance and can be used in subsequent orders;
* Posting no later than six months after purchase.
