Quantity
|
Out of stock
|
||
|
2 gang touch switch with dry contact
Option for the Livolo switch that allows not directly controlling the lighting, but transmitting a signal to a module that controls the light source (for example, Fibaro, LOXONE modules, other Z-Wave devices...).
This type of switch is mainly used with smart home control systems where a so-called "dry contact relay" is needed. "Dry contact" means that the contact does not have a direct connection to a power source or ground. This means that there is no voltage on the "dry contact" terminals unless the terminals are connected to other equipment.
The touch-sensitive switch with a dry contact requires a 220V AC power supply - phase and neutral. The switch operates in mode #1, where the contact closes when the sensor is touched and opens when the sensor is touched again. This type of switch can be used for switching 12V, 24V, 115V, and 220V. The maximum load on the dry contact is 1000W.
Features
- Dry contact;
- Power supply 220 volts;
- Can be used with any light source from 1W to 1000W;
- Sensor is illuminated in blue and red;
- Can be installed horizontally or vertically;
- Can be installed in both standard and deep mounting boxes;
- Simple and quick installation with screw connection;
- Up to 5 switches can be installed in one frame;
- Mounted to the mounting box with screws;
- Durable painted metal holder;
- Used with a tempered glass frame;
- Capacitive sensor.
Wiring diagram
A touch switch with a dry contact requires a 220 volt AC power supply. The switch operates in mode #1, where the contact is closed when touched to the sensor and opened when the sensor is touched again.
Independent relay switches provide a non-potential "dry contact"
Wiring diagram that works from 220 volts
Touch control
The touch panel incorporates innovative capacitive sensors. Thanks to these sensors, the switch responds to the slightest touch on the control panel. The sensors are designed to work even if you touch the panel with wet hands.
Strained glass
The smooth surface of the touch switch, with elegant lines and a pleasant touch, provides unparalleled tactile sensations. The surface of the touch switch is made of highly durable tempered glass.
Backlighting
The stylish LED backlighting around the touch-sensitive area of the switch creates a striking ambiance and makes it easy to locate even in the dark. The lighting can display different colors, with blue indicating the switch is off and red indicating it is on.
Waterproof
LIVOLO touch switches are waterproof and suitable for use in wet environments such as bathrooms. They comply with safety requirements and provide protection against moisture, ensuring reliable and safe operation in such conditions.
Durable. Always like new
LIVOLO touch switches excel in durability and maintain their pristine appearance, always looking like new. The OptiWite glass protects against mechanical impact and prevents scratches and other minor defects. Moreover, it requires minimal maintenance.
Fire-resistant
Fire-resistant materials provide additional protection. The tempered glass panel can withstand temperatures of up to 300°C. The absence of mechanical components eliminates the possibility of sparks.
Smart processor
The processor controls all aspects of the switch's operation, ensuring convenience, efficiency, and safety. In the event of a bulb failure, the touch switch automatically disconnects the power supply. This provides an additional level of autonomous safety system.
Standard mounting
LIVOLO touch switches have standard installation, making them compatible with regular wiring. They can be easily installed into round electrical boxes commonly used in our country, according to building standards. Therefore, installing LIVOLO touch switches is easy and convenient.
Safe
All electronic components of the switches are securely enclosed and protected, preventing the potential danger of sparks on the contacts. You can have confidence in their reliability and safety in your home.
Installation instructions:
- Turn off the power supply.
- Connect the switch according to the diagram.
- Secure the switch to the socket using screws.
- Install the touch panel.
- Restore the power supply.
- The switch will start operating after 15 seconds.
FAQ
1. When I turn on the switch does it have light?
Yes, all our touch switches have led indicators, turn on the switch – red indicators, turn off the switch – blue indicator.
2. Can I used it with LED lamps or energy-saving lamps?
Yes, our switches can work with energy-saving lamps and LED lamps as long as the wattage is more than 1W.
3. What kind of lamps can be fit with your dimmer switch?
Filament lamp and dimmable LED lamp; All bulbs works with mechanical dimmer, works with ours, Only the wattage should be 5-500W.
4. Can your switch work with home automation system?
It depends, if the system only needs a signal on/off, it can be. Otherwise, our switch is not suitable for home automation system because the codes are different.
5. Do you have an intermediate switch?
Yes, our 2 way switch also can be an intermediate switch, you can connect three 2 way switches together.
6. Which output from the switch-relay or triac?
For on/off touch switch-relay, dimmer switch – triac.
7. Can I install the switch vertically?
Sure, any pose.