payments
of $36
No commission. The customer`s billing phone number must match the monobank customer`s financial number
payments
of $55
Commission 0.01% of the value of the goods when debiting a monthly payment
A pass-through light regulator, also known as a dimmer, is a device that performs not only the function of turning the light on and off, but also regulates its brightness. Imagine starting your morning not with a bright light in your eyes, but with the light gradually coming on and filling the room. How much more pleasant would such an awakening be?
Thanks to a touch panel, which is based on advanced sensors, you can adjust the brightness of the light simply by touching it.
The dimmer is equipped with a memory function that allows it to remember the last set brightness level. This means that you can turn on the lighting fixtures with the pre-set brightness.
With its capabilities, the dimmer helps create a cozy atmosphere in the room, allowing you to adjust the lighting brightness according to your mood and needs.
The need for a pass-through switch often arises in large spaces, corridors, bedrooms, and staircases—essentially, in places where it is necessary to turn the lights on and off from multiple points.
For example, in your apartment, there is a long hallway from which you can access the bedroom, living room, bathroom, and kitchen. The main switch, of course, is located near the entrance doors, where it is used to turn on the hallway lights when entering the apartment. You decide to walk from the hallway to the bedroom, which is located at the opposite end, 7 meters away from the entrance doors, where you plan to stay. You no longer need the hallway lights on, but to turn them off, you would have to go back to the beginning. To avoid this unnecessary action, a pass-through switch is installed.
The Livolo touch dimmer can work autonomously. You can replace old switches with touch dimmers only where necessary. The installation of the Livolo touch dimmer is done in place of the old switch.
With the touch dimmer, you can easily adjust the lighting according to your needs. For example, before sleep, simply swipe your finger on the sensor to set a dim light that helps you relax and fall asleep.
During intensive work that strains your eyes, use the dimmer at full power to have bright lighting and improve visibility.
At other times of the day, set the dimmer to a moderate level, which allows you to save electricity while providing comfortable lighting for your eyes. This mode ensures optimal lighting considering your comfort and efficiency.
The Livolo touch dimmer provides you with the ability to remotely control the lighting from anywhere in the world through the Internet. This is especially convenient when you are away from home. You can turn the lights on or off and even set automatic lighting schedules at different times of the day.
This gives you full control over the lighting even when you're not physically present. You can create schedules for turning the lights on and off to create the illusion of presence when you're away. This not only provides convenience but also enhances security, especially when you're not at home.
Imagine this scenario: You're engrossed in an exciting movie and don't want to get up from bed to turn off the lights in the children's room. With a voice command to your Smart Home system, you can do all of that effortlessly. Simply give the corresponding command, and the system will turn off the lights for you.
Or, if you're in a hurry to leave the apartment and don't have time to check all the rooms, don't worry! The Smart Home can handle it according to a preset scenario. You can set up an optimal scenario that automatically turns off the lights, locks the front doors, and activates the security system when you leave. All of this can be controlled from your smartphone, ensuring that you always have the best scenario at your fingertips with the help of the Smart Home.
Smart Home provides convenience, efficiency, and security by allowing you to control various aspects of your home environment from the convenience of your smartphone.
The dimmer is designed with a glass frame, giving it a stylish appearance. This glass frame adds elegance and a modern touch to your decor, creating a harmonious blend with your interior. Thanks to its design, the dimmer becomes not only a functional device for controlling lighting but also an additional element of style that influences the overall appearance of the room.
Dimmable touch switches are compatible with various types of bulbs that support dimming functionality. The recommended power range for bulbs used with such switches is between 5 and 500 Watts.
Connect the live wire to the "L" terminal on both switches. Then, connect the two switches with an information wire at the "COM" terminal. Finally, connect the lamp wire to the "L1" terminal on the Master switch.
After connecting the wires and restoring power to the circuit, it is necessary to program the switches. Programming should begin with the Master switch. More details about programming.
Master switch - this is dimmer, operates in on/off mode and allows for adjusting the brightness of the lighting.
Slave switch - this is 2 way switches which sends the on/off command to the main switch.
Connect the live wire to the "L" terminal on all three switches. Then, connect all three switches with an information wire at the "COM" terminal. Finally, connect the lamp wire to one of the switches at the "L1" terminal.
After connecting the wires and restoring power to the circuit, it is necessary to program the switches. Programming should begin with the Main switch. More details about programming.
You can use our light dimmers with LED lamps, provided that the LED lamps support this function. This information can be found in the instruction manual or description of the LED lamps. It is also possible to dim LED strips, but make sure that your transformer supports TRIAC dimming technology.
Touch dimmers are connected to a 220-volt power supply using a regular switch wiring scheme, interrupting the phase. They do not require a neutral wire. The dimmer does not operate on a 12-volt power supply.
Yes, the dimmer operates only in the mode of adjusting the brightness of white light. To select other colors, an RGB dimmer is used, which allows controlling the brightness and color spectrum of LED lamps with the ability to change the lighting color.
To connect the strip to the dimmer, you need to use a compatible TRIAC dimmable power supply. Transformers can have different types, but the main thing to look for is the TRIAC designation and the power it is designed for.
To switch and control the brightness of a lighting device from two locations, a Main (Master) switch is used. It is a two-way dimmer connected to the load device. It operates in both on/off and brightness adjustment modes. Additionally, there is a Secondary (Slave) switch, which is a two-way switch that operates in on/off mode. It sends the on/off command to the Main switch.
All touch switches are equipped with backlighting for the sensor area. However, on Livolo button switches, there may not be any backlighting.
Yes, LIVOLO touch switches can also be installed in a vertical position. Since the mechanism can only be installed in one orientation in the glass panel or frame, the switches or sockets need to be rotated 90 degrees to the right or left for vertical installation. In the case of sockets, only the metal frame needs to be rotated. The socket should be removed from the metal frame, and after rotating the metal frame, it should be reinserted so that the socket holes are positioned horizontally.
The manufacturer claims 100,000 on/off operations, which is a very large number and difficult to verify in practice. However, based on our experience, the switches on the demonstration stand, which are frequently used, continue to function properly for over 5.5 years.
The warranty period for LIVOLO products is 1 year. We provide full and immediate replacement of any defective LIVOLO products.
payments
of $36
No commission. The customer`s billing phone number must match the monobank customer`s financial number
payments
of $55
Commission 0.01% of the value of the goods when debiting a monthly payment
Switch type | 2 way, 3 way, Dimmer |
---|---|
Width | 80 mm |
Length | 80 mm |
Number of posts Number of mounting boxes for installation. Round mounting boxes are used. |
1 |
Number of sensors Each sensor controls a separate load line. The switch sensor works in the on/off mode. The dimmer sensor works in the on/off + brightness control mode. |
2 |
Frame material | Tempered glass |
Voltage | 220 V |
Lifetime | 100,000 clicks |
Degree of protection IP stands for "Ingress Protection", a European standard for protecting devices from external influences. IP20 is suitable for dry environments, such as rooms in a house or apartment, kitchens, hallways, and bedrooms. IP44 is suitable for bathrooms and damp environments. |
IP20 |
Installation method Internal - installation is carried out in mounting boxes |
Internal |
Fastening wires | Screws |
Technology | EC |
Voice control | Google Home or Amazon Alexa |
Remote control | Livolo Home App |
Manufacturer | Wenzhou Livolo Electric Co., Ltd. |
Country of manufacture | China |
Warranty period, month | 12 |
Type of warranty | Manufacturer |
Brand | LIVOLO |
Pickup from the branch from UAH 70
Delivery to the post office from UAH 50
Courier to the address from UAH 100
Delivery according to the tariffs of Nova Poshta.
* We will ship the order today
Pickup from the branch from UAH 30
Delivery according to Ukrposhta tariffs.
* Shipping the order today or tomorrow
** Subject to 100% online payment by Visa or Mastercard
Pick up the goods yourself from the nearest one LIVOLO store Product reserve 72 hours
* Subject to product availability in the store
** The product is not moved between the warehouse and the store under order!
Delivery in 1 hour from UAH 200
Delivery at Uklon tariffs.
* Dispatch of the order within an hour
** Subject to 100% online payment by Visa or Mastercard
Delivery by courier UAH 250
Delivery from 18:00 to 20:00.
* Subject to cash payment to the courier upon receipt of the goods
Order payment
Online by Visa or Mastercard
Payment by parts PrivatBank
Hire Purchase monobank
Payment by IBAN details
Payment upon receipt
Pay attention. The commission for payment upon receipt at "Nova Poshta" is UAH 20 + 2%.
Product with European quality certificates CE та RoHS.
Warranty is 12 months
Returns within 14 days
Exchange within 30 days
We understand that something may change during the repair process. Do not worry! It is possible to exchange an already purchased product for another one from our catalog within 30 days after purchase.
Accumulative discount
The discount is determined based on the total amount of accumulated purchases, according to the following scale:
* To participate in the accumulative discount system, you must be logged in on the website.
* The obtained discount remains active forever, regardless of when you make your next purchase.
* The discount does not apply to promotional items.
Review discount - 10%
Take a photo and video of the purchased product, post it on your Facebook, Instagram, or TikTok and tag us.
Getting cashback is very simple:
* Funds are credited to your balance and can be used in subsequent orders;
* Posting no later than six months after purchase.