Type your phone number and we will call you back shortly
Working hours:
Mon–Fri: 9 AM to 6 PM
Sat: 10 AM to 3 PM
LIVOLO Touch Button Non-Latching, 230V (Doorbell / Impulse), No Neutral
The LIVOLO non-latching touch button works on the impulse principle – the contact closes only while touching the sensor. This format is convenient for doorbells, impulse relays, or controlling other devices where short-term switching is required.
It is worth noting that this switch is often used as a master button. It allows you to turn off the lights, TV, sockets, or other appliances in the apartment or house with a single touch. To implement this function, an additional contactor is required to disconnect several lines simultaneously.
Features and Advantages
Non-latching touch switch (impulse mode)
Suitable for any light sources from 1 W to 1000 W
Sensor backlight: blue – off, red – on (easy to find in the dark)
Possibility of horizontal or vertical installation
Up to 5 buttons can be placed in one frame
Compatible with standard and deep mounting boxes
Quick installation with screw connection
Used with a tempered glass frame
Durable metal support with powder coating
Sensitive capacitive sensor
Application Possibilities
Master Button: turning off lights and appliances in the entire apartment with one touch (via contactor).
Dimming from multiple locations: in combination with an impulse dimmer, you can adjust brightness or switch off the light from different points.
Doorbell: use as a touch call button.
Control of other devices: sending a 220V impulse to electromagnetic locks, relays, automation, or security systems.
Master Button (Master Switch)
The LIVOLO touch button can act as a master switch. This means that with a single touch, you can turn off lighting, TV, sockets with connected appliances (for example, an iron), and other devices simultaneously. This function saves time and provides confidence that nothing is left turned on at home.
How it Works
The master switch function uses an additional contactor, which allows several power lines to be disconnected simultaneously. This is a reliable and convenient solution for apartments and houses with many electrical devices.
2 way dimer
It allows you to adjust the brightness of the lights from multiple locations using non-fixed switches and dimmer relays.
In the specified system, non-fixed switches are used. The dimmer relay, responsible for changing the brightness of the lights, waits for impulses from the switches. The switches are connected in parallel, so when at least one of them is turned on, the impulse is transmitted to the dimmer relay, which adjusts the brightness of the lights accordingly based on the received impulse.
The wiring diagram of adjusting the brightness of the light from two places
Using switch with reset function and DIM-15 Dimmer (002470290).
The wiring diagram of adjusting the brightness of the light from two places
Using switch with reset function and SMR-M Dimmer (002470291). Power up to 160W, for LED lamps with smoke support and ESL lamps.
* To implement brightness adjustment from three or more places, you need to increase the number of switches with reset function.
** In some cases, if the switch does not ON a relay, an adapter must be installed between the blue and blue wires (S and N terminals of the relay, phase and neutral)
Door bell button
The doorbell button is designed for convenient control of the doorbell. Its usage is simple and straightforward. Just press the button to activate the doorbell and announce your presence.
Size
The dimensions of 80*80 mm allow for the installation of the doorbell button in mounting boxes of any construction standards commonly used in our country. This greatly facilitates the DIY installation of the doorbell, without the need for drilling or other complicated operations.
Supply set
Touch switch with reset function Livolo;
Screws for fastening;
Instruction;
Box;
Installation instructions:
Turn off the power supply.
Connect the switch according to the wiring diagram.
Secure the switch to the socket using screws.
Install the touch panel.
Restore the power supply.
The switch will start working after a 15-second delay.
Irina
Это просто кнопка или полноценный звонок? Дополнительно нужно что то покупать ?
Reply
Irina, это кнопка для звонка. Звонок покупается отдельно.
Reply
Светлана
Здравствуйте идёт ли монтажная коробка в комплекте или нужно покупать отдельно ?
Reply
Светлана, здравствуйте. Монтажная коробка (подрозетник) покупается отдельно. Для данной модели нужен круглый подрозетник.
Reply
Анастасия Чернобай
Красивый звонок, приобретением довольна;)
Достоинства:
Дизайн
Недостатки:
Не обнаружено
🔹 Glass frame – elegance and durability. Made of tempered glass, it does not fade over time, does not scratch, and retains its flawless appearance even after years of use. Its smooth surface adds elegance to the interior, reflects light, and creates a sense of depth.
🔹 Plastic frame – a budget-friendly and practical option. It is lightweight and easy to install, but over time, it may lose its color, develop scratches, or show signs of wear.
Glass frame test: checking for scratches and strength! Will it withstand the challenge? 🔥🔍
The backlight in the switches makes it easy to find the switch in the dark and comfortable to use at night.
Blue backlight - OFF,
Red - ON.
Light touch, modern look and premium LIVOLO style.
Wenzhou Livolo Electric Co., Ltd. — a manufacturer of modern high-quality electrical devices for home automation. Founded in 2008 in China, the company has rapidly gained the trust of customers worldwide. Today, LIVOLO is recognized in 100 countries and is confidently expanding across Europe and the USA, offering innovative solutions that redefine comfort and technology.
Product with European quality certificates CE та RoHS.
Warranty - 5 years
Returns within 14 days
Exchange within 30 days
We understand that something may change during the repair process. Do not worry! It is possible to exchange an already purchased product for another one from our catalog within 30 days after purchase.