Type your phone number and we will call you back shortly
Working hours:
Mon–Fri: 9 AM to 6 PM
Sat: 10 AM to 3 PM
Sometimes, after finishing a renovation, we notice that some areas are missing switches that would be truly useful there. In such cases, LIVOLO offers a convenient solution—a wireless touch switch.
This switch operates on a battery, attaches with double-sided tape, and has a range of up to 30 meters. You can choose from 4 colors: white, black, gray, and gold.
LIVOLO offers wireless switches with one or two sensors. Additionally, the modular system allows you to create any combination of wireless switches from 1 to 10 sensors and integrate them with outlets in a single glass frame.
Using a wireless touch switch together with smart switches enables lighting control not only manually but also via phone. This opens up possibilities for creating various automated scenarios, such as turning on lights on a schedule, when motion is detected, or at sunset.
If there’s no space to install a full smart switch, you can use its relay module, concealing it inside the device you want to control remotely.
So, when the situation seems difficult, LIVOLO always has a solution that’s just right for you.
Ways to use the wireless switch
Direct control of the smart switch. For this, a wireless switch and a smart switch are required.
Control of the smart switch through automation setup in the gateway. For this, a wireless switch, a gateway, and a smart switch are required.
How to connect the wireless switch
Follow these steps:
Touch the sensor of the smart switch or relay module for 10 seconds until the second beep. Wait 60 seconds, during which time the switch is reset to factory settings.
Touch the sensor of the smart switch or relay module for 5 seconds and release when you hear a signal.
Touch the sensor on the wireless switch.
The wireless switch can be installed anywhere, but first, check if there is a good wireless signal in that location. Perform a connection test before attaching the switch. It is recommended not to attach it to metal surfaces to avoid signal interference.
Resetting the programming: Touch the switch sensor and hold your finger until the second beep (about 10 seconds). The programming will be reset.
How to set up automation
Make sure that the gateway, wireless switch, and smart switch are added to the LIVOLO HOME app. Open the automation section and follow these steps:
1. Turn On
Condition:
Device Status > Wireless Switch > Button 1 - Single Press
Device > Smart Touch Switch (Bedroom) > Off
Action:
Device > Smart Touch Switch (Bedroom) > Turn On
Device > Switch (Bathroom) > Turn On
2. Turn Off
Condition:
Device Status > Wireless Switch > Button 1 - Single Press
Device > Smart Touch Switch (Bedroom) > On
Action:
Device > Smart Touch Switch (Bedroom) > Turn Off
Device > Switch (Bathroom) > Turn Off
Thus, even if family members do not have the mobile app to control the switch, they can use the wireless switch to manage other smart devices through automation scenarios.
Size
Standard size, same as all LIVOLO hardware: 80x80 mm.
Tempered Glass
The surface is made of high-strength OptiWhite tempered glass. Smooth, with elegant lines, and pleasant to the touch, the surface provides an unparalleled tactile experience. Switches with such a design become nearly timeless, maintaining their attractive appearance for an extended period.
🔹 Glass frame – elegance and durability. Made of tempered glass, it does not fade over time, does not scratch, and retains its flawless appearance even after years of use. Its smooth surface adds elegance to the interior, reflects light, and creates a sense of depth.
🔹 Plastic frame – a budget-friendly and practical option. It is lightweight and easy to install, but over time, it may lose its color, develop scratches, or show signs of wear.
Glass frame test: checking for scratches and strength! Will it withstand the challenge? 🔥🔍
The backlight in the switches makes it easy to find the switch in the dark and comfortable to use at night.
Blue backlight - OFF,
Red - ON.
Light touch, modern look and premium LIVOLO style.
Wenzhou Livolo Electric Co., Ltd. — a manufacturer of modern high-quality electrical devices for home automation. Founded in 2008 in China, the company has rapidly gained the trust of customers worldwide. Today, LIVOLO is recognized in 100 countries and is confidently expanding across Europe and the USA, offering innovative solutions that redefine comfort and technology.
Product with European quality certificates CE та RoHS.
Warranty - 5 years
Returns within 14 days
Exchange within 30 days
We understand that something may change during the repair process. Do not worry! It is possible to exchange an already purchased product for another one from our catalog within 30 days after purchase.
Pickup from the branch from UAH 70
Delivery to the post office from UAH 50
Courier to the address from UAH 100
Pickup from the branch from UAH 30
Online by Visa or Mastercard
Payment by parts PrivatBank
Hire Purchase monobank
Payment by IBAN details
Payment upon receipt
Warranty - 5 years
Returns within 14 days
Exchange within 30 days
Accumulative discount