Comparison
Add items to comparison
Wishlist
Add items to wish list
My order
Working hours:

Mon-Fri:: 9:00–18:00

Sat: 10:00–15:00

We send orders until 17:30

Adjusting the brightness of the light from multiple locations

A light dimmer, also known as a light regulator, is a device that performs not only the function of turning the light on and off but also adjusting its brightness.

A 2 way dimmer allows for smooth control of lighting from one location and enables turning on or off the lights from two or more locations with the brightness set on the dimmer.

Thanks to a touch panel, which is based on advanced sensors, you can change the brightness of the light by simply touching it. Even wet hands won't interfere with the dimmer's operation, as these sensors respond to the slightest touch on the control panel.

The dimmer is equipped with a memory function that allows it to remember the last set brightness level. This means you can turn on the lights with the previously set brightness.

With its capabilities, the dimmer helps create a cozy atmosphere in a room, allowing you to adjust the lighting brightness according to your mood and needs.

Advantages

  • Convenient control: The switch activates with a touch of the palm or finger, making it convenient to use.
  • High safety: The switch can be operated even with wet hands, ensuring safety in wet areas such as bathrooms.
  • Backlighting: LED backlighting allows for easy locating of the switch, even in the dark, providing convenience.
  • Easy installation: The ease of installation allows for quick setup of the switch in just a few minutes.
  • Reliability: The switch has high reliability and can withstand approximately 100,000 usage cycles, guaranteeing a long service life.
  • Remote control (optional): There is an option for remote control of the switch, allowing for convenient lighting control using a mobile device.

Features

  • Brightness control from multiple locations: Allows for adjusting the brightness of the light.
  • Compatible with any light source ranging from 5W to 500W.
  • Sensor backlighting in blue and red colors, making it easy to locate the switch at night.
  • Can be installed horizontally or vertically.
  • Compatible with both standard and deep mounting boxes.
  • Easy and quick installation with screw connections.
  • Up to 5 switches can be installed in a single frame.
  • Used with a frame made of tempered glass.

Brightness control

The ability to adjust the brightness of the light allows for smoothly turning on and off the lighting fixtures. This is especially convenient during nighttime when it is necessary to gradually adjust the lighting to a comfortable level.

Tempered glass

The surface of the dimmer is made of high-strength tempered glass, specifically OptiWite glass. The smooth surface with elegant lines is pleasant to the touch and creates a unique tactile experience.

Touch control

The touch panel is equipped with innovative sensors. Thanks to these sensors, the switch responds to the slightest touch on the control panel. The sensors are designed to work even if you touch the panel with wet hands.

Luxurious design

Currently, these switches meet nearly all the requirements of designers. The color range and shapes of the switches allow for their use in any interior. The use of tempered glass ensures practically flawless quality and durability. Switches with such a design become almost timeless, maintaining their attractive appearance for a long time. This makes them not only functional but also stylish accents in a space.

Backlighting

The stylish LED backlighting around the sensor zone of the switch creates an impressive atmosphere and allows for easy locating even in the dark. The backlighting comes in different colors, with the switch illuminated in blue when turned off and red when turned on.

Beautiful, Simple, Practical

The combination of a beautiful, user-friendly, and practical design with the ability to control the brightness of the lighting makes sensor switches with dimming function an ideal choice for stylish and functional lighting in your space.

Waterproof

The dimmer can be used in environments with relative humidity of up to 95%, such as bathrooms. In particular, LIVOLO switches have undergone special tests, including the "Salt Spray" test. After 48 hours of testing in a salt spray environment, no signs of corrosion were found on the switch components.

Durable

LIVOLO touch switches withstand the test of time and maintain their pristine appearance. The OptiWite tempered glass exhibits high resistance to temperature changes, chemicals, and scratches, ensuring durability and an impeccable surface appearance of the switch over an extended period of time.

Easy care

Touch switches will always look new and attractive. To clean the switch, simply wipe its surface with a soft damp cloth or towel.

Fire-resistant

Thanks to the use of fire-resistant materials and tempered glass, LIVOLO touch switches ensure a high level of safety and reliability in your lighting system. The touch switch panel is made of tempered glass, which can withstand temperatures up to 300°C.

Smart Processor

The processor controls all aspects of the switch's operation, ensuring convenience, efficiency, and safety. In the event of a circuit interruption, such as a bulb failure or network overload, the touch switch automatically switches to the "off" mode. This provides additional protection against damage and potentially hazardous situations.

Safe and Reliable

Due to the absence of mechanical components, the risk of sparks during operation is eliminated, ensuring safe operation, high reliability, and a long lifespan. This makes them an attractive choice for lighting systems.

Standard installation

LIVOLO touch switches have a standard installation, making them compatible with regular wiring. They can be easily installed in round mounted box used in our country, in accordance with construction standards. Therefore, installing LIVOLO touch switches is easy and convenient.

Compatibility with LED bulbs

Dimmable touch switches are compatible with various types of bulbs that support dimming functionality. The recommended power range for bulbs used with such switches is between 5 and 500 Watts.

Upgraded model

The upgraded mechanism of LIVOLO touch switches utilizes modern technologies, ensuring a high level of reliability and functionality. The warranty period for LIVOLO touch switches is 12 months, providing peace of mind and confidence in the product's quality. Additionally, these switches have a long lifespan, capable of enduring up to 100,000 presses or more than 20 years of use.

Size

The dimmer has compact dimensions, allowing for easy installation in standard mounting boxes without the need for additional remodeling or electrical system expansions.

Delivery set

- Livolo sensor dimmer;

- screws for fastening;

- instructions;

- a box;

Wiring diagram

To control the lighting from two locations

Connect the live wire to the "L" terminal on both switches. Then, connect the two switches with an information wire at the "COM" terminal. Finally, connect the lamp wire to the "L1" terminal on the Master switch.

After connecting the wires and restoring power to the circuit, it is necessary to program the switches. Programming should begin with the Master switch. More details about programming.

ГMaster switch - this is dimmer, operates in on/off mode and allows for adjusting the brightness of the lighting.

Slave switch - this is 2 way switches which sends the on/off command to the main switch.

  • for connecting the Master switch, the terminals used are as follows: L - Live, L1 - Load line output, COM - Information.
  • for connecting the Slave switch, two terminals are used: L - Live, COM - Information.

To control the lighting from three locations

Connect the live wire to the "L" terminal on all three switches. Then, connect all three switches with an information wire at the "COM" terminal. Finally, connect the lamp wire to one of the switches at the "L1" terminal.

After connecting the wires and restoring power to the circuit, it is necessary to program the switches. Programming should begin with the Main switch. More details about programming.

Installation instructions:

  1. Turn off the power supply.
  2. Connect the switch according to the diagram.
  3. Secure the switch to the socket using screws.
  4. Install the touch panel.
  5. Restore the power supply.
  6. The switch will start operating after 15 seconds.

FAQ

Can LIVOLO dimmers adjust the brightness of LED lamps and LED strips?

You can use our light dimmers with LED lamps, provided that the LED lamps support this function. This information can be found in the instruction manual or description of the LED lamps. It is also possible to dim LED strips, but make sure that your transformer supports TRIAC dimming technology.

What voltage are the LIVOLO touch dimmers designed for?

Touch dimmers are connected to a 220-volt power supply using a regular switch wiring scheme, interrupting the phase. They do not require a neutral wire. The dimmer does not operate on a 12-volt power supply.

Can the dimmer be connected to an RGB LED strip?

Yes, the dimmer operates only in the mode of adjusting the brightness of white light. To select other colors, an RGB dimmer is used, which allows controlling the brightness and color spectrum of LED lamps with the ability to change the lighting color.

What power supply is required for dimming an LED strip?

To connect the strip to the dimmer, you need to use a compatible TRIAC dimmable power supply. Transformers can have different types, but the main thing to look for is the TRIAC designation and the power it is designed for.

How to implement multi-location dimming?

To switch and control the brightness of a lighting device from two locations, a Main (Master) switch is used. It is a two-way dimmer connected to the load device. It operates in both on/off and brightness adjustment modes. Additionally, there is a Secondary (Slave) switch, which is a two-way switch that operates in on/off mode. It sends the on/off command to the Main switch.

Which switches have backlighting?

All touch switches are equipped with backlighting for the sensor area. However, on Livolo button switches, there may not be any backlighting.

Can LIVOLO switches and sockets be installed vertically?

Yes, LIVOLO touch switches can also be installed in a vertical position. Since the mechanism can only be installed in one orientation in the glass panel or frame, the switches or sockets need to be rotated 90 degrees to the right or left for vertical installation. In the case of sockets, only the metal frame needs to be rotated. The socket should be removed from the metal frame, and after rotating the metal frame, it should be reinserted so that the socket holes are positioned horizontally.

What is the lifespan of LIVOLO touch switches?

The manufacturer claims 100,000 on/off operations, which is a very large number and difficult to verify in practice. However, based on our experience, the switches on the demonstration stand, which are frequently used, continue to function properly for over 5.5 years.

What is the warranty period for LIVOLO products?

The warranty period for LIVOLO products is 1 year. We provide full and immediate replacement of any defective LIVOLO products.

Sign in with
Rate this item
Send

Touch dimmer switch 1 gang 2 way Livolo black glass (VL-C7FC1SD1-2GBP)

In stock
SKU: VL-C7FC1SD1-2GBP
$49
Compare
Sign in
to add this item to wishlist
Wholesale prices from 3 units
%
Sign in to see your personal discount
Choose color
Features
Switch type 2 way, 3 way, Dimmer
Frame material Tempered glass
Length 80 mm
Width 80 mm
Backlight

The switch sensor have a backlight

Blue - off, Red - on
Number of posts

Number of mounting boxes for installation. Round mounting boxes are used.

1
Number of sensors

Each sensor controls a separate load line.

The switch sensor works in the on/off mode.

The dimmer sensor works in the on/off + brightness control mode.

1
Switching type TRIAC
Voltage 220 V
Max. current 2 А
Max. sensor load 500 Вт
Degree of protection

IP stands for "Ingress Protection", a European standard for protecting devices from external influences.

IP20 is suitable for dry environments, such as rooms in a house or apartment, kitchens, hallways, and bedrooms.

IP44 is suitable for bathrooms and damp environments.

IP20
Installation method

Internal - installation is carried out in mounting boxes
Outdoor - mounted on a wall or other surfaces

Internal
Fastening wires Screws
Country of manufacture China
Manufacturer Wenzhou Livolo Electric Co., Ltd.
Warranty period, month 12
Lifetime 100,000 clicks
Type of warranty Manufacturer

 Pickup from the branch from UAH 70

 Delivery to the post office from UAH 50

 Courier to the address from UAH 100

Delivery according to the tariffs of Nova Poshta.

* We will ship the order today

 

 Pickup from the branch from UAH 30

Delivery according to Ukrposhta tariffs.

* Shipping the order today or tomorrow
** Subject to 100% online payment by Visa or Mastercard

 

 Pick up the goods yourself from the nearest one LIVOLO store  Product reserve 72 hours 

* Subject to product availability in the store
** The product is not moved between the warehouse and the store under order!

 

 Delivery in 1 hour from UAH 200

Delivery at Uklon tariffs.
* Dispatch of the order within an hour
** Subject to 100% online payment by Visa or Mastercard

 

 Delivery by courier UAH 250

Delivery from 18:00 to 20:00.
* Subject to cash payment to the courier upon receipt of the goods

 

More about delivery

 Order payment

  Online by Visa or Mastercard

  Payment by parts PrivatBank

  Hire Purchase monobank

  Payment by IBAN details

  Payment upon receipt

Pay attention. The commission for payment upon receipt at "Nova Poshta" is UAH 20 + 2%.

 

More about payment

Product with European quality certificates CE та RoHS.

  Warranty is 12 months

  Returns within 14 days

 Exchange within 30 days

We understand that something may change during the repair process. Do not worry! It is possible to exchange an already purchased product for another one from our catalog within 30 days after purchase.

 

More about the warranty

Accumulative discount

The discount is determined based on the total amount of accumulated purchases, according to the following scale:

  • from 10,000 UAH - 3% discount
  • from 20,000 UAH - 5% discount
  • from 30,000 UAH - 10% discount
  • from 40,000 UAH - 15% discount
  • from 50,000 UAH and more - 20% discount

* To participate in the accumulative discount system, you must be logged in on the website.

* The obtained discount remains active forever, regardless of when you make your next purchase.

* The discount does not apply to promotional items.

 

  Review discount - 10%

Take a photo and video of the purchased product, post it on your Facebook, Instagram, or TikTok and tag us.

Getting cashback is very simple:

  • Make an order on the website livolo.in.ua;;
  • Install the ordered product;
  • Take photos and videos;
  • Place on your Instagram page a post or Reels with photos and videos of purchased LIVOLO goods in the interior, with a link to @livolo_ukraine, for TikTok @livolo.ua.

* Funds are credited to your balance and can be used in subsequent orders;

* Posting no later than six months after purchase.

Up