2/3 way touch switch

A two-way switch is used to control lighting from multiple locations. It allows the lighting to be switched between different control points. The proper operation of LIVOLO three-way switches involves using two to five switches in one circuit.

Installing a LIVOLO three-way switch does not require any changes to the wiring. LIVOLO 2 way touch switch (three-way, alternative) switches can be installed on existing wiring that was originally installed for mechanical 2 way switches.

Advantages

• Convenient control: The switch activates with a touch of your hand or finger, making it easy to use.
• High safety: The switch can be operated even with wet hands, ensuring safety in damp areas such as bathrooms.
• Backlighting: LED backlighting allows for easy locating of the switch even in the dark, providing convenience.
• Easy installation: The ease of installation allows for quick setup of the switch in just a few minutes.
• Remote control (optional): There is an option for remote control of the switch, providing convenience in managing the lighting with a mobile device.
• Reliability: The switch is highly reliable and can withstand approximately 100,000 usage cycles, ensuring a long service life.

Features:

• Allows control of lighting from multiple locations.
• Can be used with any light source from 1W to 1000W.
• The sensor is illuminated in blue and red, making it easy to locate the switch at night.
• Can be installed horizontally or vertically.
• Can be installed in both standard and deep mounting boxes.
• Simple and quick installation with screw connection.
• Up to 5 switches can be installed in one frame.
• Secures to the mounting box using screws.
• Utilizes a frame made of tempered glass.

Touch control

The touch panel incorporates innovative capacitive sensors. Thanks to these sensors, the switch responds to the slightest touch on the control panel. The sensors are designed to work even if you touch the panel with wet hands.

Strained glass

The smooth surface of the touch switch, with elegant lines and a pleasant touch, provides unparalleled tactile sensations. The surface of the touch switch is made of highly durable tempered glass.

Backlighting

The stylish LED backlighting around the touch-sensitive area of the switch creates a striking ambiance and makes it easy to locate even in the dark. The lighting can display different colors, with blue indicating the switch is off and red indicating it is on.

Waterproof

LIVOLO touch switches are waterproof and suitable for use in wet environments such as bathrooms. They comply with safety requirements and provide protection against moisture, ensuring reliable and safe operation in such conditions.

Durable. Always like new

LIVOLO touch switches excel in durability and maintain their pristine appearance, always looking like new. The OptiWite glass protects against mechanical impact and prevents scratches and other minor defects. Moreover, it requires minimal maintenance.

Fire-resistant

Fire-resistant materials provide additional protection. The tempered glass panel can withstand temperatures of up to 300°C. The absence of mechanical components eliminates the possibility of sparks.

Smart processor

The processor controls all aspects of the switch's operation, ensuring convenience, efficiency, and safety. In the event of a bulb failure, the touch switch automatically disconnects the power supply. This provides an additional level of autonomous safety system.

Standard mounting

LIVOLO touch switches have standard installation, making them compatible with regular wiring. They can be easily installed into round electrical boxes commonly used in our country, according to building standards. Therefore, installing LIVOLO touch switches is easy and convenient.

Compatible with all lamps

LIVOLO touch switches are compatible with various types of lamps and lighting devices, giving you greater freedom in choosing the lighting for your home. They can work with LED bulbs, LED strips, CFLs, halogen lamps, spotlights, smart chandeliers with remote control, and many others.

Safe

All electronic components of the switches are securely enclosed and protected, preventing the potential danger of sparks on the contacts. You can have confidence in their reliability and safety in your home.

Light brightness adjustment *

The ability to adjust the brightness of the light allows for smooth dimming of the lights. This is especially convenient during darker periods of time when you need to gradually adjust the lighting to a comfortable level.

Remote control *

The convenient feature of controlling home lighting from your phone is available with the smart switch from LIVOLO. Users can schedule the lighting to turn on/off in a specific room, manually control it, or set up pre-defined scenarios. This allows for energy savings and provides maximum convenience in using the switch.

Installation instructions:

1. Turn off the power supply.
2. Connect the switch according to the diagram.
3. Secure the switch to the socket using screws.
4. Install the touch panel.
5. Restore the power supply.
6. The switch will start operating after 15 seconds.

Wiring diagram

To control the lighting from two locations

Connect the live wire to the "L" terminal on both switches. Then, connect the two switches with an information wire at the "COM" terminal. Finally, connect the lamp wire to the "L1" terminal on the Master switch.

After connecting the wires and restoring power to the circuit, it is necessary to program the switches. Programming should begin with the Master switch. More details about programming.

Master switch - this is 2 way switch, works in on/off mode. 

Slave switch - this is 2 way switches which sends the on/off command to the main switch.

• for connecting the Master switch, the terminals used are as follows: L - Live, L1 - Load line output, COM - Information.
• for connecting the Slave switch, two terminals are used: L - Live, COM - Information.

To control the lighting from three locations

Connect the live wire to the "L" terminal on all three switches. Then, connect all three switches with an information wire at the "COM" terminal. Finally, connect the lamp wire to one of the switches at the "L1" terminal.

After connecting the wires and restoring power to the circuit, it is necessary to program the switches. Programming should begin with the Main switch. More details about programming.

Video instruction

FAQ

Does LIVOLO have a three-way touch switch?

Yes. Standard 2 way touch switch (alternate, pass-through, crossover) switches have the function of three-way switching. It is possible to control the lamp from 3-5 different locations. Therefore, there is no separate model for a three-way switch because there is no need for it.

Can I connect LIVOLO 2 way touch switch switches with mechanical 2 way switches?

Livolo touch 2 way switches work in pairs with each other. They are not designed to work with mechanical switches. After connecting the touch switches, you need to program them to work together.

Can I control one light from three different locations?

Yes, Livolo 2 way touch switches allow you to control the lighting from different locations. The connection scheme for 2 way touch switcheі is similar to machanical switches, with the only difference being that the lighting control is done through the COM wire, to which you can connect 2 way touch switches in any quantity.

Can a two-way touch switch work as a simple switch?

Yes, the Livolo switch is versatile and can function as a regular switch. Moreover, in a 2 gang 2 way touch switch, one sensor can be used as a regular switch while the other can be used as a 2 way switch. This provides greater flexibility in lighting control and allows you to use the switch according to your needs.

What is the wiring diagram for a smart 2 way touch switches?

2 way switches have a Master switch and Slave switches. The Master switch controls the load, while the Slave switches send the on/off command to the Master switch. Smart switches are installed only in the position of the Master switch. Slave switches use usual 2 way switches.

Which switches have backlighting?

All touch switches are equipped with backlighting for the sensor area. However, Livolo mechanical switches do not have backlighting.

Can LIVOLO switches and sockets be installed vertically?

Yes! Livolo switches can also be installed vertically. Since the module can only be installed in a glass panel or frame in one way, the switches or sockets need to be rotated 90 degrees to the right or left for vertical mounting. In the case of sockets, only the metal frame needs to be rotated. The socket should be taken out of the metal frame, and after rotating the metal frame, the socket should be inserted back into it so that the socket holes are oriented horizontally.

What is the operational lifespan of LIVOLO touch switches?

The manufacturer claims 100,000 on/off operations, and it is difficult to verify this in practice due to the large number. However, based on our experience, the switches on the demonstration stand, which are frequently used, continue to function normally for over 5.5 years. This demonstrates the durability and reliability of these switches.

What is the warranty period for LIVOLO products?

The warranty period for Livolo products is 1 year. We provide full and immediate replacement of any defective Livolo products.