1. Install the LIVOLO HOME app
Download the app from Google Play or App Store. Create an account if you don’t have one.
2. Add a switch-compatible Livolo Control Center (gateway) to the app
Before connecting the gateway, check your Wi-Fi router settings:
- Set Wi-Fi to 2.4 GHz, disabling automatic switching to 5 GHz.
- Use Wi-Fi standard B/G with WPA/WPA2 encryption.
- If necessary, reduce Firewall protection or temporarily disable it.
The smartphone you use to add the gateway must be connected to the same Wi-Fi network as the gateway.
LIVOLO Gateway – connection and setup | Guide + LIVOLO HOME app
Make sure the hub is turned on and has internet access. You can check this in the LIVOLO HOME app or by the LED indicator on the hub: it should glow blue.
3. Add smart switches
To connect to the hub, the Light Switch must be within the hub’s radio network coverage.
LIVOLO Light Switch works only with one hub. When connected to a new hub, the switch stops sending commands to the old one. After adding it to the new hub, the switch will not be automatically removed from the device list of the old hub. You need to do this manually in the LIVOLO HOME app.
To connect the LIVOLO Light Switch to the hub:
- Install the LIVOLO Light Switch if you haven’t already.
- Open the LIVOLO HOME app.
- Tap + Add device.
- Tap Add — the countdown will begin.
- Enter a device name.
- Select a virtual room.
- Within a few seconds, the LIVOLO Light Switch will appear in the list.
If the connection fails, try again after 5 seconds.
Connecting Livolo to Google Home. Voice control
Make your home smart. Control switches with voice commands using Google Assistant.
Connecting LIVOLO HOME to Amazon Alexa. Voice control via Amazon Alexa
Set up an Amazon Alexa smart speaker and enjoy convenient voice control without extra equipment, with audio and visual responses on the speaker.
Download the app from Google Play or App Store. Create an account if you don’t have one.