EC Protocol
Fast distribution network
Automatic networking, second-level pairing, batch discovery devices, and batch network configuration.
Ultra low power consumption
Support 5W light bulb, single fire wire routing.
Signal relay transmission
Support 2-level routing signal relay, effectively expand the signal coverage.
Direct remote control
The switch and the remote control can be directly paired and used without a gateway.
EC protocol structure
Low Power Data Communication Schematic
Network Diagram of Existing Zigbee Products |
EC Network Diagram |
 |
Signal coverage increased by 2.8 times. Thanks to the secondary routing function of the EC protocol, the signal coverage of the EC series products is 2.8 times higher than that of the ZigBee series.
|
* The signal coverage test data is based on a specific laboratory environment. It is only used as a reference for comparing the signal ranges of EC and ZigBee series products. The home environment is more complicated, and the signal coverage may vary.
Signal transmission multi-path automatic switching
There are multiple EC devices around the sub-device. When the communication is not smooth, the path will be automatically switched and the optimal path will be saved.
EC protocol main algorithm
EC Gateway
EC Switch
Point-to-point control
The new EC control protocol enables the smart switch to be separated from the gateway and directly paired and controlled through the EC remote control. With the gateway, more complex control effects can be achieved.
